Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.arcetri.astro.it/irlab/doc/library/linux/khg/HyperNews/get/khg/273.html
Дата изменения: Thu Mar 23 12:37:57 2000 Дата индексирования: Wed Sep 15 00:52:27 2010 Кодировка: Поисковые слова: rigel |
Hi
I have a machine with two ethernet cards, two class C networks and roughly 50 IP aliases on various devices. The two class C networks are distinctly different, i.e., the MSB of the network address is different, and both use a 24 bit netmask. for the sake of argument: eth0 is setup on net 1: 192.168.98.0 eth1 is setup on net 2 192.168.99.0 The default route is to our router on eth0, the address is 192.168.98.10 So far, so good. We bill our customers based on traffic usage and I wrote a libpcap based package to track network usage and calculate aggregates for 5 minute periods and flush this data to disk. I originally wrote this on a Sun machine running solaris 2.5.1. This worked rather well and I was able to account for all traffic by walking through the ethernet and tcp/ip headers to find the data size. I rewrote this package to run under 2.0.33 and now I have an odd problem: Packets sent to a particular address all use the same address on the return path. If, from a different machine on our network at 192.168.98.15, I ping, with record route, to an address on the machine in question, I see:
PING 192.168.98.42 (192.168.98.42): 56 data bytes 64 bytes from 192.168.98.42: icmp_seq=0 ttl=64 time=1.3 ms RR: 192.168.98.15 192.168.98.42 192.168.98.10 192.168.98.15 And if I traceroute from the machine in question to another machine on our local network, and that address is on net 2, it still goes out over net 1:
traceroute -n 192.168.99.36 traceroute: Warning: Multiple interfaces found; using 192.168.98.10 @ eth0 traceroute to 192.168.99.36 (192.168.99.36), 30 hops max, 40 byte packets 1 192.168.99.36 0.704 ms 0.606 ms 0.604 ms So, the problem here is that I cannot track the traffic generated by by a particular website, since the source address of all outbound traffic is not the address of the website, but rather the primary address on eth0 (192.168.98.10) I have checked /proc/sys/net/ipv4/ip_forwarding and the value is 0, so I am assuming ip_forwarding is turned off. Is there a way to make this work properly, that is to say, if I request data from a particular address the address used on the sending is correct as well? What else am I missing or should I be looking for? TIA, Steve
|