Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.arcetri.astro.it/manual/en/upgrading.html
Дата изменения: Mon Jan 21 19:44:30 2013 Дата индексирования: Fri Feb 28 00:23:05 2014 Кодировка: Поисковые слова: п п п п п п c 1999 s4 linear |
Apache HTTP Server Version 2.2
In order to assist folks upgrading, we maintain a document
describing information critical to existing Apache users. These
are intended to be brief notes, and you should be able to find
more information in either the New Features document, or in
the src/CHANGES
file.
This document describes only the changes from 2.0 to 2.2. If you are upgrading from version 1.3, you should also consult the 1.3 to 2.0 upgrading document.
The compilation process is very similar to the one used in
version 2.0. Your old configure
command line (as
found in build/config.nice
in the installed server
directory) can be used in some cases. The most significant change
required will be to account for changes in module names, in
particular for the authentication and authorization modules.
Some details of changes:
mod_imagemap
mod_auth_basic
,
mod_authn_file
, mod_authz_user
, and
mod_authz_groupfile
mod_authz_host
mod_authnz_ldap
Your existing version 2.0 config files and startup scripts can
usually be used unchanged in version 2.2. Some small
adjustments may be necessary for particular configurations as
discussed below. In addition, if you dynamically load the
standard modules using the LoadModule
directive, then you will
need to account for the module name changes mentioned above.
If you choose to use the new default
configuration file for version 2.2, you will find that it has
been greatly simplified by removing all but the most essential
configuration settings. A set of example configuration settings
for more advanced features is present in the
conf/extra/
directory of the installed server. Default
configuration files are installed in the conf/original
directory.
Some runtime configuration changes that you may notice:
apachectl
option
startssl
is no longer available. To enable SSL
support, you should edit httpd.conf
to include the
relevant mod_ssl
directives and then use
apachectl start
to start the server. An example
configuration to activate mod_ssl
has been
included in conf/extra/httpd-ssl.conf
.UseCanonicalName
is now
Off
. If you did not have this directive in your
config file, you can add UseCanonicalName On
to
retain the old behavior.mod_userdir
will no longer act
on requests unless a UserDir
directive specifying a
directory name is present in the config file. To restore the
old default behavior, place the directive UserDir
public_html
in your config file.AuthDigestFile
from mod_auth_digest
has been merged with
AuthUserFile
and is now part of mod_authn_file
.mod_cache
, which was
experimental in Apache 2.0, is now a standard module.mod_disk_cache
, which was
experimental in Apache 2.0, is now a standard module.mod_mem_cache
, which was
experimental in Apache 2.0, is now a standard module.mod_charset_lite
, which was
experimental in Apache 2.0, is now a standard module.mod_dumpio
, which was
experimental in Apache 2.0, is now a standard module.Many third-party modules designed for version 2.0 will work unchanged with the Apache HTTP Server version 2.2. But all modules must be recompiled before being loaded.