Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.apo.nmsu.edu/Telescopes/SDSS/eng.papers/19970912_Actuator_Specs/ray.tolerance.html
Дата изменения: Thu Nov 27 01:45:37 2003 Дата индексирования: Sun Apr 10 08:40:10 2016 Кодировка: Поисковые слова: http www.mccme.ru |
The following table gives the sensitivity of field center, distortion, and image size to various misalignments of the optical elements in the 2.5 m telescope. Only the spectroscopic mode is examined here (the results are comparable for imaging mode).
Vital information: All calculations are done for a monochromatic image at about 0.48 micron wavelength. The original spectroscopic design is tweaked in only one way: the secondary is refocused for a single wavelength; in the original design, focus was done for a polychromatic image. Each row in the following table corresponds to decollimation of a single degree of freedom followed by a refocus and a "repointing" of the telescope. The repointing is done so as to keep the center of the focal plane pointed to the same position on the sky. (In a previous analysis, I had allowed the focal plane to translate - this is not what happens in reality at the mountain, and leads to an erroneous calcuation of distortion errors).
The performance criteria that I use are all calculated for images in the focal plane. The quantities that I measure are:
Image properties are measured for an array of points in the focal plane. The numbers entered in the table are the worst case changes across the array. Typically, these occur for objects on the periphery of the field of view. I use a focal plane with a radius of 327 mm.
All image parameters in the following table are in units of microns. The units for the decollimation steps are given.
-INCREMENTAL- Optic Motion Amount Unit Field Distor- FWHM X FWHM Y shift tion ------------microns----------- Spectroscopic Mode M1 Offset 1 mm 2183 0 61 50 M1 Tilt 1 ' 7210 1 86 74 M2 Offset 1 mm 1185 6 64 49 M2 Tilt 1 ' 2545 3 65 31 C1 Offset 1 mm 16 32 40 42 C2 Offset 1 mm 12 15 0 0