Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.apo.nmsu.edu/35m_operations/TUI/Scripts/BuiltInScripts/NICFPSFPCalibrate.html
Дата изменения: Sat Sep 6 02:16:02 2014 Дата индексирования: Sun Apr 10 08:27:52 2016 Кодировка: Поисковые слова: enceladus |
The NICFPS:FPCalibrate script allows you to take Fabry-Pérot calibration data. The script takes a sequence of images over a range of Fabry-Pérot etalon positions, as specified in a file.
The file format is as follows:
Here is a short sample file:
# Data for the NICFPS:FPCalibrate script # x y z position (integer steps) 0 0 0 100 -25 33
The input controls for the script are as follows:
Warning: this script does not restore the original etalon position when it is done, so the etalon will almost certainly be in a new position after you run this script.