Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.apo.nmsu.edu/35m_operations/TUI/Instruments/ExposeWin.html
Дата изменения: Sat Sep 6 02:16:02 2014
Дата индексирования: Sun Apr 10 01:33:22 2016
Кодировка:
Поисковые слова: п п п п п п п п п п п п п п п п п п р п р п р п п р п п р п п р п п р п п р п п р п п р п п р п п р п п п р п р п п р п р п п р п р п п р п р п п р п р п п р п р п п р п р п п р п
TUI:Instruments:Expose Window

TUI:Instruments:Expose Window

This describes the exposure window used by each instrument (the graphical interface for the hub's expose command). Details differ for each instrument, but the basics are identical. To open the expose window for a given instrument, bring up that instrument's main window, then press the Expose... button along the bottom.

Sound cues

An "Exposure Begins" sound cue is played as each exposure begins, or at most once every 30 seconds (to avoid aural overload for sequences of short exposures). An "Exposure Ends" sound cue is played for most instruments (not for Agile because the end of one Agile exposure is the beginning of the next). You may choose alternate sound cues in Preferences:Sounds.

Exposure Status

The top panel shows the status of the current exposure sequence (regardless of who started it).

Exposure Controls

The bottom portion shows the input and command widgets:

The penultimate line is the status bar; as usual it shows replies to any commands you personally start, as well as help and error messages if you try to enter something invalid.

And the command buttons take their appointed place along the bottom: