Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.apo.nmsu.edu/35m_operations/35m_manual/Instruments/SPIcam/SPIcam_obsspec_info.html
Дата изменения: Thu Mar 8 02:27:32 2007
Дата индексирования: Sun Apr 10 09:14:01 2016
Кодировка:

Поисковые слова: п п п п п п п п п п п п
Astrophysical Research Consortium - Apache Point Observatory

Astrophysical Research Consortium
Apache Point Observatory
3.5m Telescope

 

SPIcam - Observing Specialist Information

Contact Webmaster for web page errors, corrections, ommisions, and/or additions.

This page last updated: March 7, 2007 - JMD
This page last checked: October 30, 2004 - JMD


Contents

Filters and SPIcam's Filter Wheel

Mounting filters in SPIcam's Filter Wheel

Updating the filters.txt file

Killing a currently running SPIcam process


Filters and SPIcam's Filter Wheel

For a current list of filters available for the 3.5m instruments, see our Filter List

For a current list of filters available for the 3.5m instruments, see our Filter List (old).

To mount filters in SPIcam's Filter Wheel:

  1. remove filter wheel cover plate on the side of SPIcam
  2. remove two thumbscrews that hold the wheel in
  3. slide out the filter wheel
  4. carefully remove the allen head screws that hold each filter in and replace with desired filter (filters are found in the filter cabinet in the computer room)
  5. note which filters are in which slot, so you can update the filter file (next)
Updating the filters.txt file.
  1. The file is located in spicam's home directory on dryrot.apo.nmsu.edu (login:spicam password: see list)
  2. edit the [filters#.txt] file that corresponds to the wheel which you changed. (e.g. filters3.txt for wheel #3)
  3. change the filter description for the desired slot, change the update date and initials at top of file
  4. if this filter wheel was installed in SPIcam, replace the [filters.txt] file with the contents of the file you just updated:
  5. > cp filters3.txt filters.txt
    > more filters.txt 

This will let you know that the correct filter file is in place.

Killing a currently running SPIcam process.

Use the command ps ux to find the process and kill it.