Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.astro.louisville.edu/software/sbig/archive/xmccd-4.1/xmccd-4.1e/xpa-2.1.14/doc/template.html
Дата изменения: Thu Dec 25 05:27:48 2003
Дата индексирования: Thu Feb 27 22:43:38 2014
Кодировка:

Поисковые слова: п п п п п п п п п п п п п п п п п п
Access Point Names and Templates

XPATemplate: Access Point Names and Templates

Summary

XPA access points are composed of two parts: a general class and a specific name. Both parts accept template characters so that you can send/retrieve data to/from multiple servers at one time.

Description

When XPA servers call XPANew(), or XPACmdNew() to define XPA access points, they specify a string identifier composed of a class and a name. When clients communicate with XPA access points, they specify which access points to communicate with using an identifier of the form:

  class:name
All registered XPA access points that match the specified identifier will be available for communication (subject to access control rules, etc.)

As of XPA 2.1.5, the length of both the class and name designations are limited to 1024 characters.

The XPA class:name identifier actually is a template: it accepts wild cards in its syntax, so a single specifier can match more than one XPA access point. (Note that the class is optional and defaults to "*".) The allowed syntax for clients to specify the class:name template is of the form shown below. (Note that "*" is used to denote a generic wild card, but other wild cards characters are supported, as described below).

  template   	explanation
  --------	-----------
  class:name	exact match of class and name
  name		match any class with this name
  *:name	match any class with this name
  class:*	match any name of this class
  *:*		match any access point

In general, the following wild-cards can be applied to class and name:

  wildcard	explanation
  --------	-----------
  ?		match any character, but there must be one
  *		match anything, or nothing
  [...]		match an inclusive set

Although the class:name template normally is used to refer to XPA access points, these also can be specified using their individual socket identifiers. For inet sockets, the socket identifier is ip:port, where ip can be the DNS-registered name, the ASCII IP number (e.g. 123.45.67.890) or the hex IP number (e.g. 838f3a60). For unix sockets, the identifier is the socket file name. These socket identifiers are displayed as the fourth argument in the xpans display of registered access points. For example, consider the ds9 program started using inet sockets. The xpans name server will register something like this:

  csh> xpaget xpans
  DS9 ds9 gs saord.harvard.edu:3236 eric
You can access ds9 using ip:3236 in any of the three forms:
  csh> xpaget saord:3236 file
  /home/eric/data/snr.ev

  csh> xpaget 123.45.67.890:3236 file
  /home/eric/data/snr.ev

  csh> xpaget 838f3a60:3236 file
  /home/eric/data/snr.ev
In the case of unix sockets, the socket identifier is a file:
  csh> xpaget xpans
  DS9 ds9 gs /tmp/.xpa/DS9_ds9.2631 eric

  csh> xpaget /tmp/.xpa/DS9_ds9.2631 file
  /home/eric/data/snr.ev 
This feature can be useful in distinguishing between multiple instances of a program that all have the same class:name designation.

Go to XPA Help Index

Last updated: September 10, 2003