Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.astro.louisville.edu/software/sbig/archive/xmccd-4.1/xmccd-4.1e/prefs/README Дата изменения: Thu Nov 29 05:49:00 2012 Дата индексирования: Thu Feb 27 21:40:17 2014 Кодировка: Поисковые слова: orion nebula

A prefs.ccd file should be located in /usr/local/observatory/prefs on the
computer to which the camera is attached. This file is read by the indi ccd
driver, or by xmccd1, to set local camera parameters.

The software will use default parameters if the file is not present.

Parameters that will be read by prefs.ccd are --

ccd.frame_count_multi
Sets the maximum number of frames in multi mode
Default is 10
Minimum is 2
No maximum

ccd.filter_max
Sets the number of filters in the filter wheel
Should be less than or equal to the number of slots available

ccd.filter_01 to ccd.filter_10
Labels for each filter in the wheel; limit to 16 characters, such as
(1) I (725-1025)
(2) R (570-690)

ccd.base_name
Base for image file names

ccd.fits_telescope
Will assign this name to the TELESCOP field of the FITS header

ccd.ccd_script
Will process this script after each exposure when selected in the UI