Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.astro.louisville.edu/software/sbig/archive/xmccd-4.1/xmccd-4.1e/INSTALL Дата изменения: Thu Nov 29 10:05:53 2012 Дата индексирования: Thu Feb 27 21:05:07 2014 Кодировка: Поисковые слова: ngc 6559

See SBIG or APOGEE for instructions on building and installing the
software for your camera.

It helps to have a recent Linux operating system installed.
This version of XmCCD has been developed and tested on 64-bit OpenSuse 12.2.

The default installation of OpenSuse will need additional software.
At a minimum add the Motif development and fxload packages.

There may be still be issues with 64-bit systems due to the camera drivers,
especially for SBIG cameras which have a closed source driver from another
party.

Edit protocol.h for the filter wheel and maximum filter count in your system.

With recent versions of Linux, ds9, and xpa you must add this to the
local profile (e.g. in /etc/profile.local for global use):


export XPA_METHOD=local

Otherwise, you will see an error message when ds9 starts, and xmccd and ds9
cannot communicate.