Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.adass.org/adass/proceedings/adass02/P1-10/
Дата изменения: Thu Mar 13 02:22:49 2003 Дата индексирования: Tue Oct 2 05:58:03 2012 Кодировка: Поисковые слова: р р р р р р п п р р |
Quick-look images are created for future distribution on the web and to save the hand-written notes from previous measurements, that are present on the glass/film side of part of the astro-photographs, by prescanning at low resolution (250ppi and an 8bit grey scale), using commercial preprint flatbed scanners in transmission mode. At this resolution the notes are clearly readable. Furthermore these digital images contain important information for making the digital catalogue as these images, although deformed, can be used for the redetermination of the coordinates of the plate center and of the measurable magnitude interval, allowing to determine the objects/stars visual on the plate.
The geometric deformation is due to the fact that these preprint scanners are equipped with 1-D CCD rows at a fixed optical resolution. For example, a scanner with a 1000ppi optical resolution used in 250ppi mode will only read out one pixel out of four to construct the digital image. At resolutions that are not a fraction of the optical one also (interpolated) rebinning is applied. Due to the fact that the original remains at rest and is projected by a moving mirror onto the detector, this type of scanners are suffering from scanner seeing. Hence these prescan images are not suited for scientific measurements.
The deviations from a perfect mapping of the sky or ground area onto the perfect image plane, have a clear hierarchy:
To determine these effects reference stars or points are used.
Some effects can also be calibrated by clever measuring setups at
the telescope or camera (tilt of the image plane, position of the
optical axes on the plate). Unfortunately these setup data are
often not available. The size of these errors is in the
1-2m range, the question is how regular they are to be
calibrated to
0.5
m.
Therefore it is important how precise the images of the reference stars or points can be measured (locally) on the emulsion. Depending on the granularity of the emulsion this is possible down to a few tenths of a micrometer. (See also the notes on SuperCosmos (Hambley et al. 1998) and on StarScan (Winter & Holdenried 2001)).
So we are facing a bandwidth of error contributions from the micrometer to the submicrometer range on the plate. These systematic errors can be calibrated successfully only in case the plate is measured precisely to at least a factor of ten better than their size. This is implied by the fact that if one tries to determine errors with a measuring accuracy of the same order, the unknowns in the calibration model will be meaningless statistically. Thus regardless what type of plates one is measuring, this is the essential condition.
Hence, in order to get the full information content from the
plate, the measuring machine must have an absolute positioning
accuracy of at least 0.5m over the whole measuring area. This
implies that a 0.1
m class positioning table is needed. The
aim of this project is to construct a scanner using a XY
airbearing table with an open frame structure and laser
interferometer steering in a temperature (0.1K) and humidity (1%
RH) stabilised clean room, giving submicrometer absolute
positioning accuracy of the photographic plate with respect to the
fixed telecentric objective and digital camera unit.
In order to determine their applicability depending on the
introduced geometric and radiometric deformations this project
will also study in detail:
() the technique of first making an analogue copy of the plates
on duplication roll film, this in order to have an analogue backup
and to be able to automate the digitisation process by using an
unattended all time scanning technique;
(
) the effects of the photochemical cleaning of plates
containing fungi or aging deterioration.
One of the essential aspects of this project is the elaboration--after a preliminary inventory--of a catalogue of the available images including all related data necessary for the exploitation of these images. The archives concerned are the astrophotographic plate archive of the Royal Observatory of Belgium and the aerophotographic archives of the National Geographic Institute of Belgium and of the Royal Museum of Central Africa (Congo, Rwanda, Burundi). All contain photographs on glass plates as well as on film sheets.
Digital catalogues are being generated in the form of ODBC relational databases. HTML files, ActiveX objects, C++ and JavaScript programming are used to create a user-friendly interface that allows easy searching and gives a straightforward overview about the available (meta)data.
The different types of data have been put together in tables. In order to prevent data duplications, several lookup tables were created. The database of the aerial archives for example, is constructed on two types of principle tables:
Hambley, N. C. Miller, L. MacGillivray, H. T. Herd, J. T. & Cormack, W. A. 1998, MNRAS, 298, 897
Winter, L. & Holdenried, E. 2001, BAAS, 33-4, Section 129,3