Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.adass.org/adass/proceedings/adass99/P1-31/
Дата изменения: Wed Oct 11 07:01:36 2000
Дата индексирования: Tue Oct 2 06:19:08 2012
Кодировка:

Поисковые слова: п п п п п п п п п п п п п
A Commodity Computing Cluster Next: Iraf Packages
Up: Data Analysis Tools, Techniques, and Software
Previous: An Automatic Astronomical Classifier Based on Topological Neural Networks
Table of Contents - Subject Index - Author Index - PS reprint -

Teuben, P. J., Wolfire, M. G., Pound, M. W., & Mundy, L. G. 2000, in ASP Conf. Ser., Vol. 216, Astronomical Data Analysis Software and Systems IX, eds. N. Manset, C. Veillet, D. Crabtree (San Francisco: ASP), 644

A Commodity Computing Cluster

P. J. Teuben, M. G. Wolfire, M. W. Pound, L. G. Mundy
Astronomy Dept, University of Maryland, College Park

Abstract:

We have assembled a cluster of Intel-Pentium based PCs running Linux to compute a large set of Photodissociation Region (PDR) and Dust Continuum models.

For various reasons the cluster is heterogeneous, currently ranging from a single Pentium-II 333 MHz to dual Pentium-III 450 MHz CPU machines. Although this will be sufficient for our ``embarrassingly parallelizable problem'' it may present some challenges for as yet unplanned future use. In addition the cluster was used to construct a MIRIAD benchmark, and compared to equivalent Ultra-Sparc based workstations.

Currently the cluster consists of 8 machines, 14 CPUs, 50GB of disk-space, and a total peak speed of 5.83 GHz, or about 1.5 Gflops. The total cost of this cluster has been about $12,000, including all cabling, networking equipment, rack, and a CD-R backup system.

The URL for this project is http://dustem.astro.umd.edu.

1. Introduction

Commodity PC hardware components with the virtually freely available Linux operating system now provide a viable alternative compute engine (cf. Beowulf clusters) to the traditional supercomputer and desktop arrangements which most astronomy departments were using up until recently.

Approximately $10^5$ PDR and Dust Continuum models are needed (Pound et al. 2000), each of them requiring about $20$ Gflop's. A typical 10 node Pentium-II cluster can currently reach about 1 Gflops, and would provide us with a compute engine that could produce these models in a few months time. Each model generates a small amount (about 15kB) of data, which is copied back to the server, a Solaris machine on which the web server is running providing Java clients with a visual interface to the data (Pound et al. 2000).

2. Hardware

For a variety of reasons (ramp up, using Moore's law to our advantage, funding cycles in a multi-year project) we decided to build up the cluster over several months. This of course means that one winds up with a non-homogeneous cluster, which may be a handicap for codes that require more symmetric CPUs. In addition, maintenance can be complicated because of different components (video cards, ethernet cards, etc.). Our first two machines (a single CPU Pii-400 and Pii-333) arrived in Spring 1998, and later that year three dual Pii-400s arrived. In Spring 1999 we acquired three more dual Piii-450s, and then finally assembled the 8 boxes/14 node cluster in a rack.

The machines have been networked together with fast (100 Mbit) ethernet and a simple hub, since we did not need more sophisticated I/O other than transferring the final results to a central database. We also keep the cluster on a private network, not only for security reasons, but also to limit public IP usage. In a more serious Beowulf-type cluster, switches with Gigabit networking would be employed to provided faster interprocess communication.

3. Software

There are a variety of ways to software ``glue'' individual workstations together (all methods are not limited to Linux PCs). These will take care of issues like load-balancing, shared memory across machines etc.

4. Benchmarks: MirStones

The MIRIAD package (Sault et al. 1995) did not have a standard benchmark (cf. DDT in AIPS) or baseline test. A new benchmark was thus devised (MirStones) to compare different compilers, different Linux distributions, various types of hardware and other operating systems under similar hardware configurations (Teuben 2000) Version 1 of this benchmark tests basic radio interferometric data computing and manipulation (mapping and deconvolution) and produces a modest 350MB of data. A typical benchmark takes 3-8 minutes on a modern workstation, and a MirStone is normalized to unity when the benchmark takes 5 minutes.

Here are the basic ingredients to the benchmark, in MIRIAD terminology:

The following table and figure summarizes and compares a few other popular benchmarks with MirStones:



Figure 1: MirStones: square symbols represent the actual MirStone, a wall-clock time based measurement (1 represents 5 minutes elapsed time), whereas the triangles measure pure CPU ignoring any system and other I/O needed. The solid lines are linear estimates of the average Sparc and Pentium CPU performance, whereas the dashed and dotted curves are expected MirStone curves for an effective disk I/O performance of 12 and 4 MB/s resp. Various deviations from the norm should be noted: (1) Sparc optimized compiler; (2) Pentium optimized compiler; (3) non-UDMA disk; (4) Athlon K7; and (5) SCSI/Xeon.
\begin{figure}
\epsscale{0.95}
\plotone{P1-31a.eps}
\end{figure}

Acknowledgments

This project was supported in part by a NASA ADP grant NAG5-6750 and by a NASA-AMES Cooperative agreement NCC2-1058.

References

Pound, M.W. et al. 2000, this volume, 628

DDT, (Dirty Dozen Test), Aips memo 85

Sault R. J., Teuben, P. J., & Wright, M. C. H. 1995, in ASP Conf. Ser., Vol. 77, Astronomical Data Analysis Software and Systems IV, ed. R. A. Shaw, H. E. Payne, & J. J. E. Hayes (San Francisco: ASP), 433

Teuben, P. J. 2000, BIMA memo (in preparation)

Rudolph, A. & Teuben, P. J. 1991, BIMA memo 11.


© Copyright 2000 Astronomical Society of the Pacific, 390 Ashton Avenue, San Francisco, California 94112, USA
Next: Iraf Packages
Up: Data Analysis Tools, Techniques, and Software
Previous: An Automatic Astronomical Classifier Based on Topological Neural Networks
Table of Contents - Subject Index - Author Index - PS reprint -

adass@cfht.hawaii.edu