Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.adass.org/adass/proceedings/adass98/hookrn/
Дата изменения: Sat Jul 17 00:46:53 1999 Дата индексирования: Tue Oct 2 06:50:03 2012 Кодировка: Поисковые слова: ceres |
Algorithms have been developed, by the authors and others, to allow the effective combination of such dithered, undersampled data. This paper describes a simple imaging model which allows the limits of dithered imaging to be readily appreciated and briefly reviews available software. The virtues and drawbacks of different methods are presented as a guide to workers with dithered data. An example using HST NICMOS data is given.
Imaging detector systems such as CCDs are often regarded as arrays of little square buckets which count up incoming photons which fall into the appropriate pixel area. An equivalent, more instructive view of the imaging process is to consider the image formation as a convolution of the optical image at the surface of the chip with the ``pixel response function'' (PRF, typically, but not always a square top-hat function the same size as the pixel) followed by a point-sampling of this new, smoother, continuous distribution. In the undersampled case this second sampling step is not done on a sufficiently fine grid to extract all the detail from the image. Dithered imaging can improve this sampling. However, the initial smoothing from the convolution with the PRF of the detector has already suppressed fine structure in the optical image - this is made worse by the noise - and this lost information cannot be fully recovered. For this reason large pixels with dithered imaging cannot fully replace a fully sampled imaging system.
Several methods have been proposed for the reconstruction of the true intensity distribution on the sky from dithered undersampled images. Reviews of the situation a few years back, biased towards the requirements of HST WFPC2 imaging are given in Hook & Adorf (1995) and Adorf & Hook (1995). These describe iterative methods, one (ACOADD) a simple multiple input channel generalization of the standard Richardson-Lucy restoration method and the second a ``projection onto convex sets'' (POCS) approach. ACOADD was originally developed for combining images with different PSFs but can also be used, with shifted PSFs and sub-sampled output images, for combining dithered under-sampled images. Its results are normally presented as restorations carried to convergence and subsequently convolved with a kernel function which suppresses spurious high spatial frequency information. This allows a choice of the effective output PSF within the constraints of artifacts on one side and destroying too much resolution on the other. The ACOADD method is available in the stsdas.contrib package within IRAF.
The requirements of the Hubble Deep Field imaging project late in 1995 led to the development of a direct, non-iterative linear approach to this problem which has become known as ``drizzling'' and widely used for HST and other data. The method is described in Fruchter & Hook (1997, 1998). It is available within the dither package in STSDAS and also from the Web. Drizzling was used for the combination of all the imaging data from the Hubble Deep Field South observations in October 1998.
Recently Lauer (1998) has approached the problem in a different way and has derived a formally correct way of reconstructing an image from multiple dithered undersampled input images which has no loss of resolution at the Nyquist scale. This is achieved by suppressing artifacts caused by aliasing in Fourier space. This paper is also a detailed discussion of the subject in general. Although this approach may well be optimal in some cases, its recent appearance and the lack of a common-user software implementation at present mean that it cannot be included in the comparisons given below.
Both Drizzling and the Lauer method do not attempt to remove the effects of the optical PSF or the PRF of the detector. The images which they produce are hence free of the artifacts which arise when using non-linear methods to attempt to recover higher spatial frequency information which may not exist in the original data. On the other hand they fail to use such information when it does exist - typically in high contrast, high signal to noise regions of well-exposed images. In this regime non-linear restoration-based methods can be valuable.
![]() |
Adorf, H.-M. & Hook, R. 1995, in Proc. ST-ECF Workshop, Calibrating and Understanding HST and ESO Instruments, (Garching: ESO), 251
Fruchter, A. S. & Hook, R. N. 1997, in SPIE Proc., Vol. 3164, Applications of Digital Image Processing XX, ed. A. Tescher (Bellingham: SPIE), 120
, 1998, PASP, submitted, astro-ph/9808087
Hook, R. N. & Adorf, H.-M. 1995, in Proc. Calibrating Hubble Space Telescope: Post Servicing Mission, ed. A. Koratkar & C. Leitherer (Baltimore: STScI), 341
Lauer, T. R. 1998, PASP, 111, 227