Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.adass.org/adass/proceedings/adass97/albrechtm.html
Дата изменения: Fri May 15 22:17:25 1998 Дата индексирования: Tue Oct 2 03:01:26 2012 Кодировка: Поисковые слова: п п п п п п п п п п п |
Next: A Queriable Repository for HST Telemetry Data, a Case Study in using Data Warehousing for Science and Engineering
Up: Archives and Information Services
Previous: Archives and Information Services
Table of Contents -- Index -- PS reprint -- PDF reprint
M. A. Albrecht, E. Angeloni, A. Brighton, J. Girvan, F. Sogni,
A. J. Wicenec and H. Ziaeepour
European Southern Observatory,
send e-mail to: malbrech@eso.org
The VLT Archive System goals can be summarized as follows: i) record the history of VLT observations in the long term; ii) provide a research tool - make the Science Archive another VLT instrument; iii) help VLT operations to be predictable by providing traceability of instrument performance; iv) support observation preparation and analysis.
In order to achieve the goals listed above, a system is being built that will include innovative features both in the areas of technology and functionality. Among its most distinct features, the system a) will be scalable through quasi on-line data storage with DVD Jukeboxes and on-line storage with RAID arrays and HFS; b) will include transparent replication across sites; c) will be data mining-aware through meta-databases of extracted features and derived parameters.
The main components of the VLT Archive System are (see figure 1): the On-Line Archive Facility (OLAF) and the off-line Science Archive Facility (SAF). The On-Line Archive System (OLAS) takes care of receiving the data and creates the Observations Catalog while the Archive Storage system (ASTO) saves the data products onto safe, long-term archive media. The SAF includes a copy of ASTO used mainly for retrieval and user request handling, the Science Archive System (SAS) and the Science Archive Research Environment (SARE). The SAS stores the Observations Catalog in its Science Archive Database. All the data is described in an observations catalog which typically describes the instrument setup that was used for the exposure. Other information included in the catalog summarize ambient conditions, engineering data and the operations log entries made during the exposure. In addition to the raw science data, all calibration files will be available from the calibration database. The calibration database includes the best suitable data for calibrating an observation at any given time.
The Science Archive Research Environment (SARE) provides the
infrastructure to support research programmes on archive data.
Figure 2 shows an overview of the SARE setup.
Observation data will be stored within the VLT Science Archive Facility and will be available to Science Archive Research programmes one year after the observation was made.
However, in face of the very large data amounts, the selection of data for a particular archive research project becomes quickly an unmanageable task. This is due to the fact that even though the observations catalog gives a precise description of the conditions under which the observation was made, it doesn't tell anything about the scientific contents of the data. Hence, archive researchers have to first do a pre-selection of the possibly interesting data sets on the basis of the catalog, then assess each observation by possibly looking at it (preview) and/or by running some automated task to determine its suitability. Such procedure is currently used for archive research with the HST Science Archive and is acceptable when the data volume is limited (e.g., 270 GB of WFPC2 science data within the last 3.5 years of HST operations).
Already after the first year of UT1 operations, the VLT will be delivering data quantities that make it not feasible to follow the same procedure for archive research. New tools and data management facilities are required. The ESO/CDS Data Mining Project aims at closing the gap and develop methods and techniques that will allow a thorough exploitation of the VLT Science Archive.
One approach at tackling this problem is to extract parameters from the raw data that can be easily correlated with other information. The main idea here is to create an environment that contains both extracted parametric information from the data plus references to existing databases and catalogs. In its own way, this environment then establishes a link between the raw data and the published knowledge with the immediate result of having the possibility to derive classification and other statistical samples. Figure 3 illustrates the general concept.
An example of a semi-automatic parameter extraction is the object detection pipeline used by the ESO Imaging Survey (EIS) Project. Every image in the survey is subject of a set of reduction steps that aim at extracting object parameters such as 2-D Gaussian fitted centroids, integrated magnitudes, etc. The cross-correlation of parameters of this kind with selected databases and catalogs (e.g., eccentric centroids with galaxy catalogs) would provide a powerful tool for a number of science support activities from proposal preparation to archive research.
The VLT Archive System being developed will provide the infrastructure needed to offer the Science Archive as an additional instrument of the VLT. The main capabilities of the system will be a) handling of very large data volume, b) routine computer aided feature extraction from raw data, c) data mining environment on both data and extracted parameters and d) an Archive Research Programme to support user defined projects.
Next: A Queriable Repository for HST Telemetry Data, a Case Study in using Data Warehousing for Science and Engineering
Up: Archives and Information Services
Previous: Archives and Information Services
Table of Contents -- Index -- PS reprint -- PDF reprint