Äîêóìåíò âçÿò èç êýøà ïîèñêîâîé ìàøèíû. Àäðåñ îðèãèíàëüíîãî äîêóìåíòà : http://www.adass.org/adass/proceedings/adass94/wellsd.ps Äàòà èçìåíåíèÿ: Tue Jun 13 20:56:04 1995 Äàòà èíäåêñèðîâàíèÿ: Tue Oct 2 00:52:01 2012 Êîäèðîâêà: Ïîèñêîâûå ñëîâà: ngc 4676

Astronomical Data Analysis Software and Systems IV
ASP Conference Series, Vol. 77, 1995
R. A. Shaw, H. E. Payne, and J. J. E. Hayes, eds.
Visualization of GBT Geometry
D. C. Wells
National Radio Astronomy Observatory, 520 Edgemont Road,
Charlottesville, VA 22903­2475
Abstract. The Advanced Visual Systems (AVS) has been used to ex­
plore lines of sight through the complex geometry of the Green Bank
Telescope (GBT). Perspective images computed by AVS from geometric
descriptions of the components of the telescope have been used when
selecting locations for the installation of laser rangefinders and when
checking geometrical relationships along the optical path. The success
of this application demonstrates the flexibility of the toolkit­plus­visual­
programming paradigm for scientific visualization.
1. Introduction
NRAO has developed a laser ranging system 1 which will be used to measure the
active surface of the GBT (Green Bank Telescope) 2 and to measure the orien­
tation of the structure in order to improve the pointing. Some of the ray paths
between the laser rangefinders and the retroreflectors are sometimes blocked by
the structural elements of the GBT. The author conjectured that visualization
software could be an aid in planning placement and operational strategy for the
rangefinders and retroreflectors.
The output from the MSC/NASTRAN structural model of the GBT was
loaded into the AVS (Advanced Visual Systems) 3 installation in the Char­
lottesville image processing laboratory, using ``UCD Builder'', an interactive
Motif module for importing FEA and CFD data into AVS, which NRAO pur­
chased from SciViz, Inc. (Concord, MA). The AVS software was configured,
using its graphical programming tool, to render images of the structure. The
azimuth and elevation of the models could be controlled. Objects could be intro­
duced to represent laser rangefinders on the ground around the GBT. The AVS
``camera'' could be commanded to look from any location in the scene toward
any another location.
The images produced by the AVS ``geometry viewer'' are in full color, at
high resolution. In this paper, we can show only selected images, and only in
monochrome.
1 http://sadira.gb.nrao.edu:80/~ laser/
2 http://info.gb.nrao.edu/GBT/GBT.html
3 http://avs.ncsc.org/HTML/ITD/IAC/IAC.html
1

2
generate colormap
ucd contour
ucd to geom
NewTube
generate grid
UCD Builder
ucd contour
ucd to geom
NewTube
UCD Builder
generate axes
image to postscript
float
float
float
integer
float
read ucd
ucd to geom
ucd print
ucd contour
generate colormap
geometry viewer
Figure 1. The AVS Network.
2. The AVS Network
AVS is controlled by a graphical interface. Named boxes represent modules
(programs), and they are connected by pipes, with the color code indicating the
types of the data being passed from module to module. In the network shown in
Figure 1, two different structural models (the alidade structure and the tipping
structure) are being read by the two executions of the ``UCD Builder'' module,
which converts NASTRAN output files to AVS ``unstructured­cell­data'' (UCD).
Module ``read ucd'' reads a data file which describes a set of cubical objects which
represent laser rangefinders. Several generator modules add axes and a grid. The
outputs of these pipelines are combined as input to the ``geometry viewer'', which
renders the imagery. AVS has a graphical editor tool with which the network can
be modified interactively; this is the toolkit­plus­visual­programming paradigm
which is used in several other scientific visualization systems (e.g. Khoros and
IBM's Data Explorer) in addition to AVS.
3. Viewing a Rangefinder from an Elevation Bearing
In Figure 2, the GBT model is pointing northeast, resting on the grid of 25 m
squares. The spot marked ``laser'' is a 1 m cube 1.5 m above the ground, 74 m
from the pintle bearing, and about 90 m from the ``camera''. The camera is
looking from the neighborhood of one of the alidade elevation bearings toward a
single rangefinder on the ground. The simulated ``rangefinder'' is visible between
the beams of the box structure which carries the backup structure and the feed
arm of the GBT. The beams are being approximated by cylinders (using a
version of the AVS ``tube'' filter), and the closeup view of the end of one of the
principal beams of the alidade demonstrates that the cylinders are hexagonal.
The sizes of the hexagonal cylinders of the alidade and tipping structures are

3
Figure 2. Viewing a Rangefinder from an Elevation Bearing.
independently controllable, and are about 0.9 m and 0.4 m in this image. It
appears that this potential ray path would have a duty cycle of at least 50%
while the GBT is tracking.
4. Sample GBT Images Available on the Web
Color GIFs of GBT visualization images 4 are available. The first is an overview
of the telescope model 5 as seen from several hundred meters distance and a
height of about 100 m. There are 18 cubical objects in the scene, with sides
4 http://info.gb.nrao.edu/GBT/Visualization.html
5 http://info.gb.nrao.edu/GBT/visual 3 lg.gif

4
20 inches (0.5 m) long. The telescope is pointing at the zenith, and is resting
on a grid with a spacing of 1000 inches (about 25 m). The second scene is an
oblique view of the feedroom area from below 6 . The prime focus boom and the
subreflector actuator model are above the room, and there are four 0.5 m cubes
on the edges of the roof of the feedroom, representing suggested locations for
rangefinders. The third scene shows a side view of the feedroom 7 , as seen from
a point at about the same height as the room. In this scene the two cubes at the
rear corners of the feedroom represent proposed locations for rangefinders. The
AVS ``camera'' was moved to these cube locations and pointed toward the big
primary mirror in order to examine the field­of­view (which is partially blocked
by the feedroom) as seen from these locations. It was possible to confirm that
the two rangefinders, operating together, will be able to view the entire mirror
from the locations shown in this scene.
5. Checking Feedroom­to­Primary Clearance
An important specification of the GBT is that the edge of the beam formed
by the primary mirror should clear the feedroom by at least 20 cm, in order
to eliminate sidelobes produced by scattering. In order to check this feedroom­
to­primary clearance condition 8 and to check that two proposed rangefinders
would also be clear of the beam, the camera was commanded to look almost
straight down from the tip of the prime focus boom (i.e., the prime focal point
of the primary), toward the roof of the feedroom and the inner edge of the big
dish. The fact that the beam was not clear in the visualization scene led to
an engineering review of the detailed construction drawings to assure that the
as­built telescope will indeed have a clear beam. (The geometry of the feedroom
as used in the structural model, and therefore in the AVS rendering, was a
simplified abstraction.) In the author's opinion, this important case justified
the money and effort expended to make the AVS visualization software work
with the GBT structural model.
6 http://info.gb.nrao.edu/GBT/visual 2 lg.gif
7 http://info.gb.nrao.edu/GBT/visual 4 lg.gif
8 http://info.gb.nrao.edu/GBT/visual 1 lg.gif