Документ взят из кэша поисковой машины. Адрес оригинального документа : http://vega.inp.nsk.su/~inest/book/LS/memo_e.doc
Дата изменения: Tue Sep 16 11:04:52 2008
Дата индексирования: Mon Oct 1 20:17:38 2012
Кодировка:

Поисковые слова: п п п п п п п п п п

Ring Resonator For Laser Striping.



[pic]
Fig.1 Ring resonator with two nonlinear crystals for generation of second
and third harmonics.


[pic]
Fig.2 Ring resonator with one nonlinear crystal for generation of third
harmonic.

Parameter Spec Measurement Technique:

Wavelength = 355nm (Visual confirmation)
Energy = 30 uJ, 160-180 mJ (4025 pulses), 40 uJ (micropulse)

Pulse Duration = 10 ms (Measured at 10 ms on an oscilloscope)

Micropulse Width = 70ps IR, = 50 ps UV (Autocorrelator to measure IR pulse
waveform Temporal Profile - flat envelope)

Measured at 10 ms on an oscilloscope. Micropulse will be measured at
Calmar.

Beam Diameter ~5mm (Burn Paper measurement Spatial Profile)

Beam code measurement 1064 and 355

Beam Divergence ? (Burn Paper measurement)

Repetition Rate = 10 Hz/402.5 MHz

Oscilloscope Shot to Shot Stability = 3% RMS for pulse envelope.

At 355nm from 100 shots

Time jitter = 8 ps (will be measured by Calmar Shot-to-shot stability)

148.8 mJ - 174.6 mJ in 1000 shot (variation 2.6%)

Water - Two pairs of inlets/outlets

Electric Power Supply - Single phase, 220V, 30 A (two connectors)

Dimension: 7ft (L) x 2ft (W) x 1 ft (H)