Документ взят из кэша поисковой машины. Адрес оригинального документа : http://vega.inp.nsk.su/~inest/book/LS/LBO_BBO.pdf Дата изменения: Wed Oct 3 09:24:52 2007 Дата индексирования: Mon Oct 1 20:18:34 2012 Кодировка: Поисковые слова: astrophysics

LBO
LBO has many unique characteristics that contribute to its wide use as a nonlinear optical crystal. LBO's high damage threshold makes it the preferred choice for high power applications. However, inadequate AR coatings often lower the damage threshold of the device. FOREAL SPECTRUM combines the highest quality material with our excellent in-house coating capability to provide the best LBO crystals available.

LBO Specifications
Wavefront Distortion Dimension Tolerance Clear Aperture Scattering Sites Flatness Surface Quality Parallelism Perpendicularity Angle Tolerance Damage Threshold < /8 at 633nm (W: +/- 0.1mm) x (H: +/- 0.1mm) x (L: + 0.2mm/- 0.1mm) > 80% of central area No visible scattering centers when inspected by a 30 mW green laser /8 at 633nm 10/5 Scratch/Dig to MIL-O-13830A < 20 arc seconds 15 arc minutes < +/- 0.5o, < +/- 0.5
o

5 GW/cm2 for TEMoo mode, 1.3 ns, 1 Hz laser at 1.064 µm 1 GW/cm2 for cw, mode-locked laser at 1.064 µm

Standard Products
PN LBO1320 LBO1316 LBO1312 LBO1418 LBO0320 LBO2320 LBO2316 LBO2418 LBO2415 3 3 3 4 3 3 3 4 4 Dimension x 3 x 20 mm x 3 x 16 mm x 3 x 12 mm x 4 x 18 mm x 3 x 20 mm x 3 x 20 mm x 3 x 16 mm x 4 x 18 mm x 4 x 15 mm
3 3 3 3 3 3 3 3 3

Application SHG at 1064nm SHG at 1064nm SHG at 1064nm SHG at 1064nm NCPM THG at 1064nm THG at 1064nm THG at 1064nm THG at 1064nm

Coating DBAR DBAR DBAR DBAR AR AR AR AR AR

Type I I I I I II II II II

Brewster angle cut is also available. One-year warranty for all products under proper use.

2370-A Qume Drive, San Jose, CA 95131, Tel: (408) 436-5558, Fax: (408) 436-5557 http://www.forealspectrum.com email: sales@forealspectrum.com LBO&BBO, Rev 1.2, 2/13/2006, Page 1/2


BBO
BBO has a wide transmission range, high nonlinear efficiency and is widely used for harmonic generation, optical parametric amplifiers, and optical parametric oscillators.

BBO Specifications
Wavefront Distortion Dimension Tolerance Clear Aperture Flatness Scratch/Dig Code Parallelism Perpendicularity Angle Tolerance < /8 at 633nm (W ± 0.1mm) x (H ± 0.1mm) x (L + 0.2mm/- 0.1mm) > 90% central area /8 at 633nm 10/5 to MIL-O-13830A < 20 arc seconds 5 arc minutes < ± 0.3°, < ±0.3°

Standard Products
Part No. BBO1407 BBO1410 BBO1847 BBO1551 BBO1550 BBO1865 Dimension 4 x 4 x 7 mm3 4 x 4 x 10 mm3 8 x 4 x 7 mm3 5 x 5 x 1 mm3 5 x 5 x 0.1 mm3 8 x 6 x 15 mm3 Application S(T)HG at 1064nm S(T)HG at 1064nm SHG for Dye Laser S(T)HG at 800nm S(T)HG at 800nm OPO Coating AR coating AR coating P-Coating P-Coating P-Coating AR/AR coating Type I or II I or II I I I I or II

Brewster angle cut is available. Each BBO crystal has a protective dielectric coating that protects the polished surfaces from fogging due to ambient moisture. The protective coating also reduces reflection from the polished surface and improves transmission for all wavelengths that are used. Single-band, dual-band and broadband anti-reflection (AR) coatings are available. One-year warranty for all products under proper use.

Note:
BBO has a low susceptibility to the moisture. The user is advised to provide dry conditions for both the use and storage of BBO. BBO is relatively soft and therefore precautions should be taken to protect its polished surfaces. When angle adjustment is necessary, the small acceptance angle of BBO should be taken into account.

2370-A Qume Drive, San Jose, CA 95131, Tel: (408) 436-5558, Fax: (408) 436-5557 http://www.forealspectrum.com email: sales@forealspectrum.com LBO&BBO, Rev 1.2, 2/13/2006, Page 2/2