Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://hea-www.harvard.edu/~swolk/thesis/node83.html
Дата изменения: Unknown
Дата индексирования: Tue Oct 2 00:32:11 2012
Кодировка:
Поисковые слова: с р р с с п п р п п с с с р р р р р п п р р р п п р
|
Next: 14" Telescope Shut
Up: Help Sheets For
Previous: Lynxx Time Sheet
At the end of each night, send the data you have collected over
to the VAX cluster. Here is how to do it:
- In the program manger is a group called INTERNET in this
group there is an item called QVTNET. Double-click on QVTNET and
then choose the FTP option
- Using the dialog box login to the OBSERVER account on
sbast3. Once there, type:
cd
home
sbast92
observer.
This will put you into the data directory.
- Type mkdir and create a new directory under mtsb named for
the month and the date after midnight. (ie. for the night of
November 2 to the morning of the 3, use NOV_3. Cd into the new
directory (eg. cd NOV_3)
- Check to make sure you are in the right directory by typing path.
home
sbast92
observer
NOV_3
is what you would see if you used the example from above. If you are not,
use the CD command to changethe directory.
- Now you can transfer data. Type:
binary
to set the data type.
- Now type
mput F:
*.*
This will send everything from the F:
drive to the
directory you are in FTP.
When the files have finished the transfer (this takes about 10
minutes) you exit the process. To do this: Simply select the exit
option under the FILE pull-down.
Scott J. Wolk
Mon Nov 25 15:41:03 EST 1996