Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://hea-www.harvard.edu/~fine/POV/pov_pen.html
Дата изменения: Unknown Дата индексирования: Sun Apr 10 05:39:14 2016 Кодировка: Поисковые слова: t tauri |
The picture above was made with this demo POV file and this pen object POV file
The pen shaft is 0.14 units in diameter. The cap is 0.18 units in diameter, the little ridge is 0.197 units in diameter, and the clip extends up to 0.26 units above the central axis. The clip faces up in it's initial position -- a rotation of 130 (or so) degrees about the x axis will position the clip such that it seems to be resting on the same surface as the cap itself.
The origin lies at the writing end of the pen cylinder -- this can be seen in the uncapped pen above which is translated off the origin but still on the Z axis. The writing tip extends past the origin 0.73 units in the negative X direction, and the rest of the pen shaft extends 4 and 7/8 units in the positive X direction.
The origin seems to go arbitrarily through the middle of the pen cap, however when the pen and cap are rendered together in their default positions, the pen is properly closed. The cap extends almost 1 and 3/16 inches past the origin in -X (towards the top of the cap), and the "clip" part of the cap extends 1.275 units in the positive X direction. Units correspond to inches in the original object.
WARNING: This POV object is based on a real object. I'm not aware of any legal issues related to the design of that real object. It is the user's responsibility to cover your ass.
Fine's Home |
|
Send Me Email |