Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://hea-www.harvard.edu/RD/xpa/info.html
Дата изменения: Unknown
Дата индексирования: Mon Oct 1 22:49:09 2012
Кодировка:
Поисковые слова: asteroid
|
Summary
There are various kinds of generic information you can retrieve about
an XPA access point by using the xpaget command.
Description
You can find out which XPA access points have been registered with
the currently running
XPA name server
by executing the
xpaget
command to retrieve info from the XPA name server:
xpaget xpans
If, for example, the
stest test server program
is running, the following XPA access points will be returned (the specifics
of the returned info will vary for different machines and users):
XPA xpa gs 838e2f67:1262 eric
XPA xpa1 gs 838e2f67:1266 eric
XPA c_xpa gs 838e2f67:1267 eric
XPA i_xpa i 838e2f67:1268 eric
Note that access to this information is subject to the usual
XPA Access Control restrictions.
Each XPA access point supports a number of reserved sub-commands that provide
access to different kinds of information, e.g. the access control for
that access point. These sub-commands can be executed by using
xpaset
or
xpaget
at the command line, or
XPAGet()
or
XPASet()
in programs, e.g:
xpaget ds9 -acl
xpaget ds9 -help
xpaget ds9 env FOO
xpaset -p ds9 env FOO foofoo
With the exception of -help and -version, reserved
sub-commands are available only on the machine on which the XPA server
itself is running.
The following reserved sub-commands are defined for all access points:
- -acl get (set) the access control list [options: host type acl, for set]
-
The 'xpaset' option allows you to add a new acl for a given host, or change
the acl for an existing host. See
XPA Access Control
for more information.
This access point is available only on the server machine.
- -env get (set) an environment variable [options: name (value, for set)]
-
The 'xpaget' option will return the value of the named environment
variable. The 'xpaset' option will set the value of the names
variable to the specified value.
This access point is available only on the server machine.
(Please be advised that we have had problems setting environment
variables in static Tcl/Tk programs such as ds9 running under Linux.)
- -clipboard set(get) information on a named clipboard
- Clients can store ASCII state information on any number of named
clipboards. Clipboards of the same name created by clients on
different machines are kept separate. The syntax for creating a
clipboard is:
[data] | xpaset [server] -clipboard add|append [clipboard_name]
xpaset -p [server] -clipboard delete [clipboard_name]
Use "add" to create a new clipboard or replace the contents of an existing
one. Use "append" to append to an existing clipboard.
Information on a named clipboard is retrieved using:
xpaget [server] -clipboard [clipboard_name]
- -exec set: execute commands from buffer [options: none]
-
If -exec is specified in the paramlist of an 'xpaset' call, then further
sub-commands will be retrieved from the data buffer.
- -help get: return help string for this XPA or sub-command [options: name (for sub-commands)]
-
Each XPA access point and each XPA sub-command can have a help string
associated with it that is specified when the access point is defined.
The -help option will return this help string. For XPA access points
that contain user-defined sub-commands, you can get the help string
for a particular sub-command by specifying its name, or else get the
help strings for all sub-commands if not name is specified.
- -ltimeout get (set) the long timeout value [options: seconds|reset]
-
The 'xpaget' option will return the value of the long timeout (in seconds).
The 'xpaset' option will set the value of the long timeout. If "reset" is
specified, then the timeout value will be reset to the default value.
- -nsconnect set: re-establish name server connection to all XPA's [options: none]
-
If the
XPA Name Server (xpans)
process has terminated unexpectedly and then re-started, this
sub-command can be used to re-establish the connection. You use it by
sending the command to the [name:port] or [file] of the access point
instead of to the XPA name (since the latter requires the xpans
connection!):
xpaset -p 838e2f67:1268 -nsconnect
See xpans for more information.
- -nsdisconnect set: break name server connection to all XPA's [options: none]
-
This sub-command will terminate the connection to the
XPA Name Server (xpans), thereby making
all access points inaccessible except through their underlying [name:port]
or [file] identifiers. I forget why we added it, it seems pretty useless.
- -stimeout get (set) the short timeout value [options: seconds|reset]
-
The 'xpaget' option will return the value of the short timeout (in seconds).
The 'xpaset' option will set the value of the short timeout. If "reset" is
specified, then the timeout value will be reset to the default value.
- -remote set: register xpa with remote server [options: host[:port] [acl]] [-proxy]
-
This sub-command will register the XPA access point with the XPA name
server (xpans) on the specified host (which must already be running).
The specified host also is given access control to the access point,
using the specified acl or the default acl of "+" (meaning the remote
host can xpaset, xpaget, xpainfo or xpaaccess). If the acl is
specified as "-", then the access point is unregistered.
See Communication Between Machines
for more information on how this sub-command is used.
- -version get: return XPA version string [options: none]
-
The version refers to the version of XPA used to define this access point
(currently something like 2.0).
You can add your own reserved commands to all XPA access points by using the
XPACmdAdd()
routine, passing the XPA handle returned by XPA XPAGetReserved(void)
as the first argument. Note again that these will only be available on the
machine where the XPA service is running.
Go to XPA Help Index
Last updated: September 10, 2003