Table Filtering

Документ взят из кэша поисковой машины. Адрес оригинального документа : http://hea-www.harvard.edu/RD/funtools/filters.html
Дата изменения: Unknown
Дата индексирования: Tue Oct 2 00:15:52 2012
Кодировка:
Поисковые слова: п п п п п п п п п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р п р р п п р п

Table Filtering

Funfilters: Filtering Rows in a Table

Summary

This document contains a summary of the user interface for filtering rows in binary tables.

Description

Table filtering allows a program to select rows from an table (e.g., X-ray event list) by checking each row against one or more expressions involving the columns in the table. When a table is filtered, only valid rows satisfying these expressions are passed through for processing.

A filter expression is specified using bracket notation appended to the filename of the data being processed:

  foo.fits[pha==1&&pi==2]

It is also possible to put region specification inside a file and then pass the filename in bracket notation:

  foo.fits[@my.reg]

Filters must be placed after the extension and image section information, when such information is present. The correct order is:

file[fileinfo,sectioninfo][filters]
file[fileinfo,sectioninfo,filters]

where:

file is the Funtools file name
fileinfo is an ARRAY, EVENT, FITS extension, or FITS index
sectioninfo is the image section to extract
filters are spatial region and table (row) filters to apply

See Funtools Files for more information on file and image section specifications.

Filter Expressions

Table filtering can be performed on columns of data in a FITS binary table or a raw event file. Table filtering is accomplished by means of table filter specifications. An table filter specification consists of one or more filter expressions Filter specifications also can contain comments and local/global processing directives.

More specifically, a filter specification consist of one or more lines containing:

  # comment until end of line
  # include the following file in the table descriptor
  @file
  # each row expression can contain filters separated by operators
  [filter_expression] BOOLOP [filter_expression2], ...
  # each row expression can contain filters separated by the comma operator
  [filter_expression1], [filter_expression2], ...
  # the special row# keyword allows a range of rows to be processed
  row#=m:n
  # or a single row
  row#=m
  # regions are supported -- but are described elsewhere
  [spatial_region_expression]

A single filter expression consists of an arithmetic, logical, or other operations involving one or more column values from a table. Columns can be compared to other columns, to header values, or to numeric constants. Standard math functions can be applied to columns. Separate filter expressions can be combined using boolean operators. Standard C semantics can be used when constructing expressions, with the usual precedence and associativity rules holding sway:

  Operator                                Associativity
  --------                                -------------
  ()                                      left to right
  !! (logical not)                        right to left
  !  (bitwise not) - (unary minus)        right to left
  *  /                                    left to right
  +  -                                    left to right
  < <= > >=                               left to right
  == !=                                   left to right
  &  (bitwise and)                        left to right
  ^  (bitwise exclusive or)               left to right
  |  (bitwise inclusive or)               left to right
  && (logical and)                        left to right
  || (logical or)                         left to right
  =                                       right to left

For example, if energy and pha are columns in a table, then the following are valid expressions:

  pha>1
  energy == pha
  (pha>1) && (energy<=2)
  max(pha,energy)>=2.5

Comparison values can be integers or floats. Integer comparison values can be specified in decimal, octal (using '0' as prefix), hex (using '0x' as prefix) or binary (using '0b' as prefix). Thus, the following all specify the same comparison test of a status mask:

  (status & 15) == 8           # decimal
  (status & 017) == 010        # octal
  (status & 0xf) == 0x8        # hex
  (status & 0b1111) == 0b1000  # binary

The special keyword row# allows you to process a range of rows. When row# is specified, the filter code skips to the designated row and only processes the specified number of rows. The "*" character can be utilized as the high limit value to denote processing of the remaining rows. Thus:

  row#=100:109

processes 10 rows, starting with row 100 (counting from 1), while:

  row#=100:*

specifies that all but the first 99 rows are to be processed.

Spatial region filtering allows a program to select regions of an image or rows of a table (e.g., X-ray events) using simple geometric shapes and boolean combinations of shapes. For a complete description of regions, see Spatial Region Filtering.

Separators Also Are Operators

As mentioned previously, multiple filter expressions can be specified in a filter descriptor, separated by commas or new-lines. When such a comma or new-line separator is used, the boolean AND operator is automatically generated in its place. Thus and expression such as:

  pha==1,pi=2:4

is equivalent to:

  (pha==1) && (pi>=2&&pi<=4)

[Note that the behavior of separators is different for filter expressions and spatial region expressions. The former uses AND as the operator, while the latter user OR. See Combining Region and Table Filters for more information about these conventions and how they are treated when combined.]

Range Lists

Aside from the standard C syntax, filter expressions can make use of IRAF-style range lists which specify a range of values. The syntax requires that the column name be followed by an '=' sign, which is followed by one or more comma-delimited range expressions of the form:

  col = vv              # col == vv in range
  col = :vv             # col <= vv in range
  col = vv:             # col >= vv in range
  col = vv1:vv2         # vv1 <= col <= vv2 in range

The vv's above must be numeric constants; the right hand side of a range list cannot contain a column name or header value.

Note that, unlike an ordinary comma separator, the comma separator used between two or more range expressions denotes OR. Thus, when two or more range expressions are combined with a comma separator, the resulting expression is a shortcut for more complicated boolean logic. For example:

  col = :3,6:8,10:

is equivalent to:

  (col<=3) || (col>=6 && col <=8) || (col >=10)

Note also that the single-valued rangelist:

  col = val

is equivalent to the C-based filter expression:

  col == val

assuming, of course, that val is a numeric constant.

Math Operations and Functions

It is permissible to specify C math functions as part of the filter syntax. When the filter parser recognizes a function call, it automatically includes the math.h and links in the C math library. Thus, it is possible to filter rows by expressions such as these:

(pi+pha)>(2+log(pi)-pha)
min(pi,pha)*14>x
max(pi,pha)==(pi+1)
feq(pi,pha)
div(pi,pha)>0

The function feq(a,b) returns true (1) if the difference between a and b (taken as double precision values) is less than approximately 10E-15. The function div(a,b) divides a by b, but returns NaN (not a number) if b is 0. It is a safe way to avoid floating point errors when dividing one column by another.

Include Files

The special @filename directive specifies an include file containing filter expressions. This file is processed as part of the overall filter descriptor:

  foo.fits[pha==1,@foo]

Header Parameters

The filter syntax supports comparison between a column value and a header parameter value of a FITS binary tables (raw event files have no such header). The header parameters can be taken from the binary table header or the primary header. For example, assuming there is a header value MEAN_PHA in one of these headers, you can select photons having exactly this value using:

pha==MEAN_PHA

Examples

Table filtering is more easily described by means of examples. Consider data containing the following table structure:

double TIME
int X
int Y
short PI
short PHA
int DX
int DY

Tables can be filtered on these columns using IRAF/QPOE range syntax or any valid C syntax. The following examples illustrate the possibilities:

pha=10
pha==10: select rows whose pha value is exactly 10
pha=10:50: select rows whose pha value is in the range of 10 to 50
pha=10:50,100: select rows whose pha value is in the range of 10 to 50 or is equal to 100
pha>=10 && pha<=50: select rows whose pha value is in the range of 10 to 50
pi=1,2&&pha>3: select rows whose pha value is 1 or 2 and whose pi value is 3
pi=1,2 || pha>3: select rows whose pha value is 1 or 2 or whose pi value is 3
pha==pi+1: select rows whose pha value is 1 less than the pi value
(pha==pi+1) && (time>50000.0): select rows whose pha value is 1 less than the pi value and whose time value is greater than 50000
(pi+pha)>20: select rows in which the sum of the pi and pha values is greater than 20
pi%2==1: select rows in which the pi value is odd

Currently, integer range list limits cannot be specified in binary notation (use decimal, hex, or octal instead). Please contact us if this is a problem.

Go to Funtools Help Index