Документ взят из кэша поисковой машины. Адрес оригинального документа : http://hea-www.harvard.edu/RD/funtools/INSTALL Дата изменения: Tue Apr 29 16:49:11 2003 Дата индексирования: Mon Oct 1 23:00:21 2012 Кодировка: Поисковые слова: р р р р с с р с р р р с с п

Quick Summary
=============

To build and install the Funtools package, simply execute:

./configure # site-specific configuration
make # build the software
make install # install it
make clean # clean up unneeded temp files

You might want to install in a directory other than /usr/local, so as not to
require root access. To do this, configure for a different install directory:

./configure --prefix=
e.g.,
./configure --prefix=/soft/saord

Programs will be installed in /soft/saord/bin, libraries in /soft/saord/lib,
and include files in /soft/saord/include. Indeed, we do this at SAO and
recommend it as a general rule, in order to keep SAORD software in one place
that does not conflict with other installations. Note that you will need to
add the bin directory to your path.

The build ("make") takes only a minute or so on modern machines. To
monitor its progress and/or check for errors, redirect output to a file
and use the 'tail' command:

make >& foo.log &; tail -f foo.log # csh
or
make 1>foo.log 2>&1 &; tail -f foo.log # sh, bash


Details of Installation
=======================

NB: These are generic installation instructions, modified for Funtools.

The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').

If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.

The file `configure.in' is used to create `configure' by a program
called `autoconf'. You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.

The simplest way to compile this package is:

`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.

Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.

1. `cd' to the directory containing the package's source code and type
"./configure". This runs a configuration script created by GNU
autoconf, which configures Funtools for your system and creates a
Makefile. The configure script allows you to customize the Funtools
configuration for your site; for details on how you can do this,
type "./configure -help" or refer to the autoconf documentation (not
included here). The Funtools "configure" script supports the following
special switch(es) in addition to the standard ones:

--with-tcl=|no XPA will generate a shared object for use
with Tcl/Tk, if configure can find the Tcl
libraries. You can use this switch to specify
a path for Tcl libraries, if these are not in
a standard place. You also can use the switch
to turn off Tcl shared object generation.

Standard options are listed below. the most important of which
is --prefix (to specify where to install) and --exec-prefix (where to
install executables, if the top level is different from where libraries
and include files are being installed. At SAO, we just use --prefix.
We recommend --prefix be set to a directory that will hold saord software
(e.g., --prefix=/soft/saord) in order to make management of our software
easier.

NB: be sure to use only absolute path names (those starting with "/")
in the --prefix and --exec_prefix options. (The configure options we
use at SAO for various machines are given as examples in the script
file called "saoconfig" in this directory.)

NB: Please avoid use of --prefix with 'make install' to change the
install directory. We use the original value of --prefix to determine
where compiled objects are located for linking slave filter programs.
The slave will look in that directory for imregions.o and evregions.o.
If you change the install directory, you will not be able to use these
precompiled objects. Instead, each filter will have to recompile the
region code.

2. Type `make' to compile the package. This will create the libfuntools.a
library and the Funtools utility programs (funcnts, fundisp, etc.)

########## no self-tests are implemented in Funtools #########################

3. Optionally, type `make check' to run any self-tests that come with
the package.

###############################################################################

4. Type "make install" to install Funtools libraries and binaries in
standard places. You'll need write permission on the installation
directories to do this. The installation directories are
determined by the "configure" script and may be specified with
the --prefix option to "configure". See the Makefile for information
on what directories were chosen.

5. There are .html help files in the doc directory. You can copy
these files to a more convenient location, if you like. We
did not automate this step because we did not know where to
copy these files by default. (NB: The help.html file is the
top level index file.)

6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make Distclean'. The latter
also removes all Makefiles (except the one at the top level).

Compilers and Options
=====================

Some systems require unusual options for compilation or linking that
the `configure' script does not know about. You can give `configure'
initial values for variables by setting them in the environment:

./configure CC=c89 CFLAGS=-O2 LIBS=-lposix

You also can use this facility to specify a compiler other than the default
gcc (if it exists).

Installation Names
==================

By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/lib', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH':

e.g.,
./configure --prefix=/soft/saord

Programs will be installed in /soft/saord/bin, libraries in /soft/saord/lib,
and include files in /soft/saord/include. We recommend this as a general rule,
in order to keep SAORD software in one place that does not conflict with other
installations. Note that you will need to add the bin directory to your path.

You can specify separate installation prefixes for architecture-specific
files and architecture-independent files. If you give `configure' the option
`--exec-prefix=PATH', the package will use PATH as the prefix for installing
programs and libraries. Documentation and other data files will still use the
regular prefix.

In addition, if you use an unusual directory layout you can give
options like `--bindir=PATH' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.

If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

Optional Features
=================

Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.

Specifying the System Type
==========================

There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on. Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
CPU-COMPANY-SYSTEM

See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.

If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.

Sharing Defaults
================

If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.

Operation Controls
==================

`configure' recognizes the following options to control how it
operates.

`--cache-file=FILE'
Use and save the results of the tests in FILE instead of
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
debugging `configure'.

`--help'
Print a summary of the options to `configure', and exit.

`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).

`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.

`--version'
Print the version of Autoconf used to generate the `configure'
script, and exit.

`configure' also accepts some other, not widely useful, options.

If you have questions, please contact us at: saord@cfa.harvard.edu.

SAO/HEAD Software R&D Group