Документ взят из кэша поисковой машины. Адрес оригинального документа : http://crydee.sai.msu.ru/ftproot/pub/comp/os/os2/hobbes/os2/info/os2prob.txt Дата изменения: Tue Jan 31 00:00:00 1995 Дата индексирования: Mon Dec 24 12:42:53 2007 Кодировка: Поисковые слова: п п п п р п р п р п р п р п

Note: there are 3 CIS id's for reporting problems listed at the end
of this file.

------ Submit an OS/2 Problem Report ------

<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
<< THIS SUPPORT IS ELIGIBLE FOR U.S. CUSTOMERS ONLY >>
<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Customers should use this form to report a suspected OS/2 DEFECT to
IBM support.

IBM employees should refer to the OS2DFECT FORUM in IBMPC for instructions on
how to report an OS/2 defect.

If you have How-to or other questions about OS/2, please refer to these
sources:

- The OS/2 on-line help and README.
- If you have a CompuServe id, you may submit an item to the
appropriate section within the forums under IBMOS2 (GO IBMOS2).
- Many bulletin board systems contain user forums where OS/2 users
share information and ideas on OS/2.

If you have Beta problems or suggestions, please refer to the bottom of this
form for the proper reporting procedure. While we appreciate your input, we do
not accept Beta problems through the Base defect or ES/LS support ID's.
Customers with CompuServe ID's may report problems on CIS in IBM's OS2SUPPORT
forum, section 16, BETA PROGRAM '92. If you do NOT have a CIS ID, please send
the feedback via Internet to the CIS address: 76711.175@compuserve.com

Please provide as much information as possible on your problem. Feel free to
add additional space, or remove sections of the form that are not relevant to
your problem.

CONTACT PERSON: __________________________________

PHONE NUMBER: (___) ___-____ x____ Phone number where you can be
FAX NUMBER: (___) ___-____ x____ contacted between 8-5, M-F.

Note: Support will normally be handled electronically through
CompuServe mail. IBM may contact you via telephone if it
appears it will expedite resolution to the problem.

Would you rather be contacted by phone? Y _ N _

ONE LINE DESCRIPTION OF THE OS/2 PROBLEM:
________________________________________________________ __________

DETAILED PROBLEM DESCRIPTION - If possible, provide step-by-step recreation
scenario. Also, please include any fixes or work arounds you may have already
tried.
________________________________________________________ __________
________________________________________________________ __________
________________________________________________________ __________
________________________________________________________ __________
________________________________________________________ __________

Enter any error messages that occur: ________________________________

Select the appropriate answers by placing an "X" in the space indicated. Can
you recreate the problem? Y _ N _
Has the problem occurred on more than one system? Y _ N _

OS/2 OPERATING SYSTEM SOFTWARE CONFIGURATION:
OS/2 Version 2.0 .........: _ CSD Level: _______
OS/2 Version 2.0 GRE......: _ CSD Level: _______
OS/2 1.3 Standard Edition : _ CSD Level: _______
OS/2 1.3 Extended Edition : _ CSD Level: _______

NOTE - CSD = Corrective Service Diskette.
Use the SYSLEVEL command to determine, if unknown.

HARDWARE CONFIGURATION (provide as much as possible):
Brand and model of PC: ____________________________________
Microprocessor: Intel _ Other (specify) _______________
Type: 286 _ 386SX _ 386 _ 486SX _ 486 _ Speed: __ MHz
Total RAM ....: __ MB
Disk drive ...: ____ MB
File System: FAT _ HPFS _
Manufacturer: ___________________ Model # _______
Type: IDE _ SCSI _ MFM _ RLL _ Unknown _
Manufacturer and model # of disk controller: ______________________
Manufacturer, revision #, and date of System BIOS: __________________
Manufacturer and model # of video adapter: __________________________
Manufacturer and model # of display: ________________________________
Memory installed on video adapter: _____ EGA _ VGA _ SVGA _ XGA _
Diskette Drive A: 3 1/2" _ 5 1/4" _
Diskette Drive B: 3 1/2" _ 5 1/4" _
List other adapters installed: _____________________
_____________________
_____________________

TRAP INFORMATION - If a TRAP occurs and results in the 16 bit trap display
similar to the following, enter any of the register values that you recorded:

SESSION TITLE: __________________________________________________
TRAP____
AX=____ BX=____ CX=____ DX=____ BP= ____ SI=____ DI=____
DS=____ ES=____ FLG=____ CS=____ IP=____ SS=____ SP=____
MSW=____ CSLIM=____ SSLIM=___ DSLIM=___ ESLIM=____ CSACC=__
SSACC=__ DSACC=__ ESACC=__ ERRCD=____ ERLIM=____ ERACC=__
________________________________________________________ ________
________________________________________________________ ________
________________________________________________________ ________

If a TRAP occurs and results in the 32 bit trap display similar to the
following, enter any of the register values that you recorded:
TRAP ____
ERRCD=____ ERACC=____ ERLIM=________ EAC=________ EBX=________
ECX=________ EDX=________ ESI=________ EDI=________ EBP=________
FLG=________ CS:EIP=____:________ CSACC=____ CSLIM=________
SS:ESP=____:________ SSACC=____ SSLIM=________ DS=____ DSACC=____
DSLIM=________ CR0=________ ES=____ ESACC=____ ESLIM=________
CR2=________ FS=____ FSACC=____ FSLIM=________ GS=____ GSACC=____
GSLIM=________

THE SYSTEM DETECTED AN INTERNAL PROCESSING
ERROR AT LOCATION ##____:________ - ____:____. _____, ____ ________
INTERNAL REVISION _.___, __/__/__

PRINTER - If this is a printer problem, please provide the following:
Printer Vendor: __________________ Model ....: ________________
Driver Name ..: __________________ Port Used : ________________
Printer is attached to: Local _ LAN Server _ Host _

COMMUNICATIONS MANAGER - If this is a problem with Communications Manager,
please provide answers in this section:
OS/2 Extended Services ............: _ CSD Level: _______
OS/2 EE Communications Manager 1.3 : _ CSD Level: _______
Describe your Communications Manager configuration (DFT, T-R, etc):
________________________________________________________ ________
________________________________________________________ ________

LOCAL AREA NETWORK - If this is a local area network problem, please enter
information about the lan involved.

LAN SERVER: OS/2 LAN Server Version 1.3 : _ CSD Level: ________
OS/2 LAN Server 2.0 Entry ..: _ CSD Level: ________
OS/2 LAN Server 2.0 Advanced: _ CSD Level: ________

LAN REQUESTER:
LAN Server 2.0 Requester....: _ CSD Level: ________
OS/2 1.3 Requester..........: _ CSD Level: ________

DOS LAN REQUESTER
LS 2.0 Requester ...........: _ CSD Level: ________
OS/2 1.3 Requester .........: _ CSD Level: ________
DOS Version: ____ DOS Vendor: _________________

Is the failing system a Domain Controller? Y _ N _
Is the failing system an additional server? Y _ N _

DATABASE MANAGER - If this is an OS/2 DATABASE MANAGER problem, please enter
information about the DataBase Manager problem below.

SQL Error Code ....: ________
Secondary Return Code: ________
Error occurs when database is being accessed as:
Stand Alone ......: Y _ N _
Requester (Client): Y _ N _
Database Server ..: Y _ N _
Using RDS ........: Y _ N _
Using LAN ........: Y _ N _
If the error is occurring at a requester, can the problem be recreated
at the server? .....: Y _ N _
Error occurs in which application?
Query Manager.....: _
LI ..............: _ (Command Line Interface)
User Application..: _
If a trap has occurred, provide the SQLABEND results:
________________________________________________________ _________
________________________________________________________ _________
________________________________________________________ _________

PLEASE REVIEW ALL OF THIS PROBLEM REPORT BEFORE SENDING. When you are
ready to send this OS/2 Problem Report, send the form via CISMAIL
to ---

Base problems - Base Support, 76711,610
ES/LS problems - ES/LS Support, 76711,611
(ES = IBM Extended Services, LS = IBM LAN Server)

Beta problems - 2.1 Beta, 76711,175
(FEEDBACK purposes only...you will not be contacted).