Документ взят из кэша поисковой машины. Адрес оригинального документа : http://neptun.sai.msu.su/manual/vhosts/ip-based.html
Дата изменения: Mon Oct 15 20:35:59 2001
Дата индексирования: Mon Oct 1 20:13:35 2012
Кодировка:
Поисковые слова: п п п п п р п п р п п р п п р п п р п п р п п р п

Apache IP-based Virtual Host Support

Apache HTTP Server Version 1.3

Apache IP-based Virtual Host Support

See also: Name-based Virtual Hosts Support

System requirements

As the term IP-based indicates, the server must have a different IP address for each IP-based virtual host. This can be achieved by the machine having several physical network connections, or by use of virtual interfaces which are supported by most modern operating systems (see system documentation for details, these are frequently called "ip aliases", and the "ifconfig" command is most commonly used to set them up).

How to set up Apache

There are two ways of configuring apache to support multiple hosts. Either by running a separate httpd daemon for each hostname, or by running a single daemon which supports all the virtual hosts.

Use multiple daemons when:

There are security partitioning issues, such as company1 does not want anyone at company2 to be able to read their data except via the web. In this case you would need two daemons, each running with different User, Group, Listen, and ServerRoot settings.
You can afford the memory and file descriptor requirements of listening to every IP alias on the machine. It's only possible to Listen to the "wildcard" address, or to specific addresses. So if you have a need to listen to a specific address for whatever reason, then you will need to listen to all specific addresses. (Although one httpd could listen to N-1 of the addresses, and another could listen to the remaining address.)

Use a single daemon when:

Sharing of the httpd configuration between virtual hosts is acceptable.
The machine services a large number of requests, and so the performance loss in running separate daemons may be significant.

Setting up multiple daemons

Create a separate httpd installation for each virtual host. For each installation, use the Listen directive in the configuration file to select which IP address (or virtual host) that daemon services. e.g.

    Listen www.smallco.com:80

It is recommended that you use an IP address instead of a hostname (see DNS caveats).

Setting up a single daemon with virtual hosts

For this case, a single httpd will service requests for the main server and all the virtual hosts. The VirtualHost directive in the configuration file is used to set the values of ServerAdmin, ServerName, DocumentRoot, ErrorLog and TransferLog or CustomLog configuration directives to different values for each virtual host. e.g.

    <VirtualHost www.smallco.com>
    ServerAdmin webmaster@mail.smallco.com
    DocumentRoot /groups/smallco/www
    ServerName www.smallco.com
    ErrorLog /groups/smallco/logs/error_log
    TransferLog /groups/smallco/logs/access_log
    </VirtualHost>

    <VirtualHost www.baygroup.org>
    ServerAdmin webmaster@mail.baygroup.org
    DocumentRoot /groups/baygroup/www
    ServerName www.baygroup.org
    ErrorLog /groups/baygroup/logs/error_log
    TransferLog /groups/baygroup/logs/access_log
    </VirtualHost>

It is recommended that you use an IP address instead of a hostname (see DNS caveats).

Almost any configuration directive can be put in the VirtualHost directive, with the exception of directives that control process creation and a few other directives. To find out if a directive can be used in the VirtualHost directive, check the Context using the directive index.

User and Group may be used inside a VirtualHost directive if the suEXEC wrapper is used.

SECURITY: When specifying where to write log files, be aware of some security risks which are present if anyone other than the user that starts Apache has write access to the directory where they are written. See the security tips document for details.

Apache HTTP Server Version 1.3