Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://neptun.sai.msu.su/manual/vhosts/details.html
Дата изменения: Mon Oct 15 20:35:59 2001 Дата индексирования: Mon Oct 1 20:05:21 2012 Кодировка: Поисковые слова: aurora |
The virtual host code was completely rewritten in Apache 1.3. This document attempts to explain exactly what Apache does when deciding what virtual host to serve a hit from. With the help of the new NameVirtualHost directive virtual host configuration should be a lot easier and safer than with versions prior to 1.3.
If you just want to make it work without understanding how, here are some examples.
There is a main_server which consists of all the
definitions appearing outside of
<VirtualHost>
sections. There are virtual
servers, called vhosts, which are defined by <VirtualHost>
sections.
The directives Port, ServerName, ServerPath, and ServerAlias can appear anywhere within the definition of a server. However, each appearance overrides the previous appearance (within that server).
The default value of the Port
field for
main_server is 80. The main_server has no default
ServerPath
, or ServerAlias
. The
default ServerName
is deduced from the servers IP
address.
The main_server Port directive has two functions due to
legacy compatibility with NCSA configuration files. One
function is to determine the default network port Apache will
bind to. This default is overridden by the existence of any Listen
directives. The second function is to specify the port number
which is used in absolute URIs during redirects.
Unlike the main_server, vhost ports do not affect what ports Apache listens for connections on.
Each address appearing in the VirtualHost
directive can have an optional port. If the port is unspecified
it defaults to the value of the main_server's most recent
Port
statement. The special port *
indicates a wildcard that matches any port. Collectively the
entire set of addresses (including multiple A
record results from DNS lookups) are called the vhost's
address set.
Unless a NameVirtualHost
directive is used for a specific IP address the first vhost
with that address is treated as an IP-based vhost. In 1.3.13
and later that includes the IP address *
.
If name-based vhosts should be used a
NameVirtualHost
directive must appear
with the IP address set to be used for the name-based vhosts.
In other words, you must specify the IP address that holds the
hostname aliases (CNAMEs) for your name-based vhosts via a
NameVirtualHost
directive in your configuration
file.
Multiple NameVirtualHost
directives can be used
each with a set of VirtualHost
directives but only
one NameVirtualHost
directive should be used for
each specific IP:port pair.
The ordering of NameVirtualHost
and
VirtualHost
directives is not important which
makes the following two examples identical (only the order of
the VirtualHost
directives for one
address set is important, see below):
| NameVirtualHost 111.22.33.44 | <VirtualHost 111.22.33.44> <VirtualHost 111.22.33.44> | # server A # server A | </VirtualHost> ... | <VirtualHost 111.22.33.55> </VirtualHost> | # server C <VirtualHost 111.22.33.44> | ... # server B | </VirtualHost> ... | <VirtualHost 111.22.33.44> </VirtualHost> | # server B | ... NameVirtualHost 111.22.33.55 | </VirtualHost> <VirtualHost 111.22.33.55> | <VirtualHost 111.22.33.55> # server C | # server D ... | ... </VirtualHost> | </VirtualHost> <VirtualHost 111.22.33.55> | # server D | NameVirtualHost 111.22.33.44 ... | NameVirtualHost 111.22.33.55 </VirtualHost> | |
(To aid the readability of your configuration you should prefer the left variant.)
After parsing the VirtualHost
directive, the
vhost server is given a default Port
equal to the
port assigned to the first name in its VirtualHost
directive.
The complete list of names in the VirtualHost
directive are treated just like a ServerAlias
(but
are not overridden by any ServerAlias
statement)
if all names resolve to the same address set. Note that
subsequent Port
statements for this vhost will not
affect the ports assigned in the address set.
During initialization a list for each IP address is
generated and inserted into an hash table. If the IP address is
used in a NameVirtualHost
directive the list
contains all name-based vhosts for the given IP address. If
there are no vhosts defined for that address the
NameVirtualHost
directive is ignored and an error
is logged. For an IP-based vhost the list in the hash table is
empty.
Due to a fast hashing function the overhead of hashing an IP address during a request is minimal and almost not existent. Additionally the table is optimized for IP addresses which vary in the last octet.
For every vhost various default values are set. In particular:
ServerAdmin
,
ResourceConfig
,
AccessConfig
,
Timeout
,
KeepAliveTimeout
,
KeepAlive
,
MaxKeepAliveRequests
,
or SendBufferSize
directive then the respective value is inherited from the
main_server. (That is, inherited from whatever the final
setting of that value is in the main_server.)If the main_server has no ServerName
at this
point, then the hostname of the machine that httpd is running
on is used instead. We will call the main_server address
set those IP addresses returned by a DNS lookup on the
ServerName
of the main_server.
For any undefined ServerName
fields, a
name-based vhost defaults to the address given first in the
VirtualHost
statement defining the vhost.
Any vhost that includes the magic _default_
wildcard is given the same ServerName
as the
main_server.
The server determines which vhost to use for a request as follows:
When the connection is first made by a client, the IP address to which the client connected is looked up in the internal IP hash table.
If the lookup fails (the IP address wasn't found) the request is served from the _default_ vhost if there is such a vhost for the port to which the client sent the request. If there is no matching _default_ vhost the request is served from the main_server.
In Apache 1.3.13 and later, if the IP address is not found
in the hash table then the match against the port number may
also result in an entry corresponding to a
NameVirtualHost *
, which is subsequently handled
like other name-based vhosts.
If the lookup succeeded (a corresponding list for the IP address was found) the next step is to decide if we have to deal with an IP-based or a name-base vhost.
If the entry we found has an empty name list then we have found an IP-based vhost, no further actions are performed and the request is served from that vhost.
If the entry corresponds to a name-based vhost the name list
contains one or more vhost structures. This list contains the
vhosts in the same order as the VirtualHost
directives appear in the config file.
The first vhost on this list (the first vhost in the config
file with the specified IP address) has the highest priority
and catches any request to an unknown server name or a request
without a Host:
header field.
If the client provided a Host:
header field the
list is searched for a matching vhost and the first hit on a
ServerName
or ServerAlias
is taken
and the request is served from that vhost. A Host:
header field can contain a port number, but Apache always
matches against the real port to which the client sent the
request.
If the client submitted a HTTP/1.0 request without
Host:
header field we don't know to what server
the client tried to connect and any existing
ServerPath
is matched against the URI from the
request. The first matching path on the list is used and the
request is served from that vhost.
If no matching vhost could be found the request is served from the first vhost with a matching port number that is on the list for the IP to which the client connected (as already mentioned before).
If the URI from the request is an absolute URI, and its hostname and port match the main server or one of the configured virtual hosts and match the address and port to which the client sent the request, then the scheme/hostname/port prefix is stripped off and the remaining relative URI is served by the corresponding main server or virtual host. If it does not match, then the URI remains untouched and the request is taken to be a proxy request.
NameVirtualHost
directive.ServerAlias
and ServerPath
checks are never performed for an IP-based vhost.NameVirtualHost
directive within
the config file is not important. Only the ordering of
name-based vhosts for a specific address set is significant.
The one name-based vhosts that comes first in the
configuration file has the highest priority for its
corresponding address set.Host:
header field is never used during the
matching process. Apache always uses the real port to which
the client sent the request.ServerPath
directive exists which is a
prefix of another ServerPath
directive that
appears later in the configuration file, then the former will
always be matched and the latter will never be matched. (That
is assuming that no Host:
header field was
available to disambiguate the two.)_default_
vhost catches a request only if
there is no other vhost with a matching IP address
and a matching port number for the request. The
request is only caught if the port number to which the client
sent the request matches the port number of your
_default_
vhost which is your standard
Port
by default. A wildcard port can be
specified (i.e., _default_:*
) to catch
requests to any available port. In Apache 1.3.13 and later
this also applies to NameVirtualHost *
vhosts._default_
vhost). In other words the main_server
only catches a request for an unspecified address/port
combination (unless there is a _default_
vhost
which matches that port)._default_
vhost or the main_server is
never matched for a request with an unknown or
missing Host:
header field if the client
connected to an address (and port) which is used for
name-based vhosts, e.g., in a
NameVirtualHost
directive.VirtualHost
directives because it will force
your server to rely on DNS to boot. Furthermore it poses a
security threat if you do not control the DNS for all the
domains listed. There's more
information available on this and the next two
topics.ServerName
should always be set for each
vhost. Otherwise A DNS lookup is required for each
vhost.In addition to the tips on the DNS Issues page, here are some further tips:
VirtualHost
definitions. (This is to aid the
readability of the configuration -- the post-config merging
process makes it non-obvious that definitions mixed in around
virtual hosts might affect all virtual hosts.)NameVirtualHost
and
VirtualHost
definitions in your configuration to
ensure better readability.ServerPaths
which are prefixes of
other ServerPaths
. If you cannot avoid this then
you have to ensure that the longer (more specific) prefix
vhost appears earlier in the configuration file than the
shorter (less specific) prefix (i.e., "ServerPath
/abc" should appear after "ServerPath /abc/def").