Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://mavr.sao.ru/hq/sts/linux/doc/ipc_guide/mq.html
Дата изменения: Unknown Дата индексирования: Fri Dec 28 19:17:22 2007 Кодировка: Поисковые слова: ion drive |
As usual, I want to spew some overview at you before getting into the nitty-gritty. A message queue works kind of like a FIFO, but supports some additional functionality. Generally, see, messages are taken off the queue in the order they are put on. Specifically, however, there are ways to pull certain messages out of the queue before they reach the front. It's like cutting in line. (Incidentally, don't try to cut in line while visiting the Great America amusement park in Silicon Valley, as you can be arrested for it. They take cutting very seriously down there.)
In terms of usage, a process can create a new message queue, or it can connect to an existing one. In this, the latter, way two processes can exchange information through the same message queue. Score.
One more thing about System V IPC: when you create a message queue, it doesn't go away until you destroy it. All the processes that have ever used it can quit, but the queue will still exist. A good practice is to use the ipcs command to check if any of your unused message queues are just floating around out there. You can destroy them with the ipcrm command, which is preferable to getting a visit from the sysadmin telling you that you've grabbed every available message queue on the system.
Let's get something going! First of all, you want to connect to a queue, or create it if it doesn't exist. The call to accomplish this is the msgget() system call:
int msgget(key_t key, int msgflg);msgget() returns the message queue ID on success, or -1 on failure (and it sets errno, of course.)
The arguments are a little weird, but can be understood with a little brow-beating. The first, key is a system-wide unique identifier describing the queue you want to connect to (or create). Every other process that wants to connect to this queue will have to use the same key.
The other argument, msgflg tells msgget() what to do with queue in question. To create a queue, this field must be set equal to IPC_CREAT bit-wise OR'd with the permissions for this queue. (The queue permissions are the same as standard file permissions--queues take on the user-id and group-id of the program that created them.)
A sample call is given in the following section.
What about this key nonsense? How do we create one? Well, since the type key_t is actually just a long, you can use any number you want. But what if you hard-code the number and some other unrelated program hardcodes the same number but wants another queue? The solution is to use the ftok() function which generates a key from two arguments:
key_t ftok(const char *path, int id);Ok, this is getting weird. Basically, path just has to be a file that this process can read. The other argument, id is usually just set to some arbitrary char, like 'A'. The ftok() function uses information about the named file (like inode number, etc.) and the id to generate a probably-unique key for msgget(). Programs that want to use the same queue must generate the same key, so they must pass the same parameters to ftok().
Finally, it's time to make the call:
#include <sys/msg.h> key = ftok("/home/beej/somefile", 'b'); msqid = msgget(key, 0666 | IPC_CREAT);
In the above example, I set the permissions on the queue to 666 (or rw-rw-rw-, if that makes more sense to you). And now we have msqid which will be used to send and receive messages from the queue.
Each message is made up of two parts, which are defined in the template
structure
struct msgbuf { long mtype; char mtext[1]; };The field mtype is used later when retrieving messages from the queue, and can be set to any positive number. mtext is the data this will be added to the queue.
"What?! You can only put one byte arrays onto a message queue?! Worthless!!" Well, not exactly. You can use any structure you want to put messages on the queue, as long as the first element is a long. For instance, we could use this structure to store all kinds of goodies:
struct pirate_msgbuf { long mtype; /* must be positive */ char name[30]; char ship_type; int notoriety; int cruelty; int booty_value; };
Ok, so how do we pass this information to a message queue? The answer is simple, my friends: just use msgsnd():
int msgsnd(int msqid, const void *msgp, size_t msgsz, int msgflg);msqid is the message queue identifier returned by msgget(). The pointer msgp is a pointer to the data you want to put on the queue. msgsz is the size in bytes of the data to add to the queue. Finally, msgflg allows you to set some optional flag parameters, which we'll ignore for now by setting it to 0.
And here is a code snippet that shows one of our pirate structures being added to the message queue:
#includekey_t key; int msqid; struct pirate_msgbuf pmb = {2, "L'Olonais", 'S', 80, 10, 12035}; key = ftok("/home/beej/somefile", 'b'); msqid = msgget(key, 0666 | IPC_CREAT); msgsnd(msqid, &pmb, sizeof(pmb), 0); /* stick him on the queue */
Aside from remembering to error-check the return values from all these functions, this is all there is to it. Oh, yeah: note that I arbitrarily set the mtype field to 2 up there. That'll be important in the next section.
A call to msgrcv() that would do it looks something like this:
#includekey_t key; int msqid; struct pirate_msgbuf pmb; /* where L'Olonais is to be kept */ key = ftok("/home/beej/somefile", 'b'); msqid = msgget(key, 0666 | IPC_CREAT); msgrcv(msqid, &pmb, sizeof(pmb), 2, 0); /* get him off the queue! */
There is something new to note in the msgrcv() call: the 2! What does it mean? Here's the synopsis of the call:
int msgrcv(int msqid, void *msgp, size_t msgsz, long msgtyp, int msgflg);
The 2 we specified in the call is the requested msgtyp. Recall that we set the mtype arbitrarily to 2 in the msgsnd() section of this document, so that will be the one that is retrieved from the queue.
Actually, the behavior of msgrcv() can be modified drastically by choosing a msgtyp that is positive, negative, or zero:
msgtyp | Effect on msgrcv() |
---|---|
Zero | Retrieve the next message on the queue, regardless of its mtype. |
Positive | Get the next message with an mtype equal to the specified msgtyp. |
Negative | Retrieve the first message on the queue whose mtype field is less than or equal to the absolute value of the msgtyp argument. |
So, what will often be the case is that you'll simply want the next message on the queue, no matter what mtype it is. As such, you'd set the msgtyp parameter to 0.
Often, the latter choice is the most appropriate, since you might want your program to clean up the queue at some time or another. To do this requires the introduction of another function: msgctl().
The synopsis of msgctl() is:
int msgctl(int msqid, int cmd, struct msqid_ds *buf);
Of course, msqid is the queue identifier obtained from msgget(). The important argument is cmd which tells msgctl() how to behave. It can be a variety of things, but we're only going to talk about IPC_RMID, which is used to remove the message queue. The buf argument can be set to NULL for the purposes of IPC_RMID.
Say that we have the queue we created above to hold the pirates. You can destroy that queue by issuing the following call:
#include. . msgctl(msqid, IPC_RMID, NULL);
And the message queue is no more.
Here is the source for kirk.c:
#include <stdio.h> #include <stdlib.h> #include <errno.h> #include <sys/types.h> #include <sys/ipc.h> #include <sys/msg.h> struct my_msgbuf { long mtype; char mtext[200]; }; int main(void) { struct my_msgbuf buf; int msqid; key_t key; if ((key = ftok("kirk.c", 'B')) == -1) { perror("ftok"); exit(1); } if ((msqid = msgget(key, 0644 | IPC_CREAT)) == -1) { perror("msgget"); exit(1); } printf("Enter lines of text, ^D to quit:\n"); buf.mtype = 1; /* we don't really care in this case */ while(gets(buf.mtext), !feof(stdin)) { if (msgsnd(msqid, (struct msgbuf *)&buf, sizeof(buf), 0) == -1) perror("msgsnd"); } if (msgctl(msqid, IPC_RMID, NULL) == -1) { perror("msgctl"); exit(1); } return 0; }
The way kirk works is that it allows you to enter lines of text. Each line is bundled into a message and added to the message queue. The message queue is then read by spock.
Here is the source for spock.c:
#include <stdio.h> #include <stdlib.h> #include <errno.h> #include <sys/types.h> #include <sys/ipc.h> #include <sys/msg.h> struct my_msgbuf { long mtype; char mtext[200]; }; int main(void) { struct my_msgbuf buf; int msqid; key_t key; if ((key = ftok("kirk.c", 'B')) == -1) { /* same key as kirk.c */ perror("ftok"); exit(1); } if ((msqid = msgget(key, 0644)) == -1) { /* connect to the queue */ perror("msgget"); exit(1); } printf("spock: ready to receive messages, captain.\n"); for(;;) { /* Spock never quits! */ if (msgrcv(msqid, (struct msgbuf *)&buf, sizeof(buf), 0, 0) == -1) { perror("msgrcv"); exit(1); } printf("spock: \"%s\"\n", buf.mtext); } return 0; }
Notice that spock, in the call to msgget(), doesn't include the IPC_CREAT option. We've left it up to kirk to create the message queue, and spock will return an error if he hasn't done so.
Notice what happens when you're running both in separate windows and you kill one or the other. Also try running two copies of kirk or two copies of spock to get an idea of what happens when you have two readers or two writers. Another interesting demonstration is to run kirk, enter a bunch of messages, then run spock and see it retrieve all the messages in one swoop. Just messing around with these toy programs will help you gain an understanding of what is really going on.
Copyright © 1997 by Brian "Beej" Hall. This guide may be reprinted in any medium provided that its content is not altered, it is presented in its entirety, and this copyright notice remains intact. Contact beej@ecst.csuchico.edu for more information.