|
Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://xmm.vilspa.esa.es/sas/5.4.1/doc/epevents/node7.html
Дата изменения: Fri Jan 10 22:49:25 2003 Дата индексирования: Sat Dec 22 09:10:14 2007 Кодировка: Поисковые слова: arp 220 |
| Parameter | Mand | Type | Default | Constraints |
| eventset | yes | data-set | ||
|
EPIC PN raw events data-set | ||||
| outset | yes | data-set | events.dat | |
|
EPIC PN events data-set with calibrated and corrected PI channels | ||||
| reemissionthresh | no | integer | none | |
|
selection parameter: trigger threshold (in adu) for preceding events | ||||
| randomizeposition | no | boolean | Y | Y/N |
|
yes, if the computation of physical camera detector coordinates
is done with randomization (former parameter `randomize') | ||||
| randomizeenergy | no | boolean | Y | Y/N |
|
yes, if the raw amplitudes should be randomized within a pulse-height bin | ||||
| testenergywidth | no | boolean | N | Y/N |
|
yes, if use non-standard energy bin width, this will yield incorrect
scientific results and should only be used for calibration tests,
no support | ||||
| gainctiaccuracy | no | integer | 2 | 0-2 |
|
Accuracy of gain/cti correction | ||||
| patternanalysis | no | boolean | Y | Y/N |
|
no, if pattern recognition has been done already
(future development, not active yet) | ||||
| withphotonmap | no | boolean | N | Y/N |
|
yes, if diagnostic photon map file should be created
(see parameter photonmapset) | ||||
| photonmapset | no | data-set | photonmap.dat | |
|
name of optional output diagnostic photon map file, it will have
4 extensions corresponding to 4 user-definable energy bands
(see lothresh and hithresh) | ||||
| lothresh | no | real-list | 0 200 500 0 | |
| lower band limits [eV] for parameter photonmapset | ||||
| hithresh | no | real-list | 200 500 2000 32000 | |
| upper band limits [eV] for parameter photonmapset | ||||
| mappatterntype | no | string | sssn | |
|
pattern types for the events of the individual band maps
(future development, not fully active yet),
s = singles, d = doubles, t = triples,
q = quadruples, n = non-singles, r = recognized,
u = unrecognized, m = multiples (m = d+t+q), a = all,
x = doubles in x-direction, y = doubles in y-direction,
v = doubles in y-direction with main near CAMEX (i.e. split backward),
w = doubles in y-direction with main away from CAMEX (i.e. split forward) | ||||
| withoutoftime | no | boolean | N | Y/N |
|
yes, if ``out-of-time events'' file should be created instead of
``normal events'' file (only meaningful for IMAGING modes)
(considered as experimental) | ||||
| withctisrcpos | no | boolean | N | Y/N |
|
yes, if not the RAWY coordinates but the source position SRCPOS should be
used in the energry correction routines (only meaningful for IMAGING modes)
(considered as experimental).
See Sect.3.2. | ||||
| withctilongterm | no | boolean | Y | Y/N |
|
yes, if corrections for long-term CTI increase should be applied
| ||||
| ctilongtermsoft | no | boolean | N | Y/N |
|
yes, if special soft energy function should be included in the long-term
CTI corrections
(considered as experimental)
| ||||
| ctilongtermy | no | boolean | Y | Y/N |
|
yes, if special Y-dependence should be included in the long-term
CTI corrections
| ||||
| ctilongtermpar | no | real-list | 1.5E-5 1.15 -0.26 0.10 1.0 | |
|
optional long-term CTI correction parameter values:
temporal slope, 3 coefficients of energy dependence, spatial Y reference
| ||||
| withccdoffsets | no | boolean | N | Y/N |
|
yes, if CCD offset corrections should be applied
(considered as experimental)
| ||||
| withtempcorrection | no | boolean | N | Y/N |
|
yes, if temperature-gain corrections should be applied
(considered as experimental)
| ||||
| withframecti | no | boolean | N | Y/N |
|
yes, if TIME-derived frame numbers should be used in CTI correction for
non-imaging modes (TI, BU) instead of the ODF frame numbers. For
FF, eFF, LW, SW modes internally always the TIME-derived frame numbers
instead of the dummy ODF numbers are used
(should not be changed).
| ||||
| Parameter | Mand | Type | Default | Constraints |