Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/calibration/documentation/CALHB/node661.html
Дата изменения: Tue Sep 20 19:45:20 2011
Дата индексирования: Mon Apr 11 03:16:25 2016
Кодировка:
Поисковые слова: arp 220

Calibration Access and Data Handbook

Description

The files describe the PSFs of the flight mirror modules xrt1, xrt2 or xrt3 vs field angle, energy and field azimuth. The xrt1, xrt2 or xrt3 telescopes are respectively associated with the MOS1, MOS2 and PN EPIC cameras. Each file will consist of a header, a table section and an image section.

• an alignment correction table is provided. It contains correction factors which account for the mirror module field curvature, EPIC defocus, mirror module tilt with respect to the boresight and EPIC decenter with respect to the average focal point of the mirror modules. Initially these correcting factors will be set to 0.

• a second table section contain a three dimensional table of 6 fitting coefficients provided as a function of 6 energies and 6 field angles. These coefficient will be used by the CCF access layer to generate analytical PSF descriptions using a simple bi-dimensional Gaussian fit.

• a third table section contain a table of 21 fitting coefficients. These coefficient will be used by the CCF access layer to generate analytical PSF descriptions using the bi-dimensional multi-Gaussian fit. The validity range of this analytical fit is limited to the central 10 arcmin of the field of view and to energies lower than 4.5 keV.

• the image section contains a collection of 36 FITS images obtained at 6 energies and 6 field angles. Theses images can be interpolated by the CCF access layer to any energy, field angle or field azimuth.

• table KING_PARAMS provides the parameters of the King function tabulated against Energy and off-axis angle.

  ENERGY

  Photon energy in eV.

  THETA

  Off-axis angle in radians.

  PARAMS

  Two parameters, core radius and slope for each ENERGY/THETA pair.

• table BETAPSF provides a set of parameters of the PSF as a function of RGS dispersion coordinate (Z-coordinate in SACOORD, being integrated in cross-dispersion. This is required for the RGS response generation. The table has the following columns:

  TYPE

  a flag on which function these parameters act; either 'G' or 'L' for Gaussian of Lorentzian parameterization, respectively.

  NORM

  Amplitude of Gaussian and normalization of Lorentzian, as described by parameters $a$ and $b$ in section 3.4.33, respectively.

  WIDTH

  either Gaussian $\sigma$, or Lorentzian FWHM, as described by parameters $\sigma$ and $w$ in section 3.4.33, respectively.

  CENTER

  Center of the distribution with respect to zero, as described by parameters $\mu$ and $\nu$ in section 3.4.33, respectively.

  Note: Inversion due to the mirroring effect of the gratings takes place as part of the CAL function CAL_rgsgetXRTFigure (see section 3.4.33).