Create a JWST Moving Target Program in APT

Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.stsci.edu/ops/jwst_movingtarget.html
Дата изменения: Mon Feb 22 17:20:00 2016
Дата индексирования: Sun Apr 10 13:18:38 2016
Кодировка:
Поисковые слова: arp 220

This exercise will require the PC to create a JWST moving target program in APT.

Steps:

Create a New JWST Program in APT. Use one of your test IDs for the program ID. Fill in all of the required information in the proposal information section.
In the Targets section, select New Solar System Target. Pick either a planet or a moon and fill in the necessary information.
Create an observation using the solar system target. Fill in the necessary template information.
Run observation in the visit planner. Make sure the observation schedules. If it does not, rework the observation until it does schedule.
Create another solar system target in the target section.
Create a new observation folder and select an instrument template that is different from the one used in the first observation. Fill in the template information.
Run this observation through the visit planner. Make sure it schedules.
Repeat the above steps as many times as you want. The goal is to become comfortable with moving target programs.
Save your program and check it in. This should be done in JWST SOGS, not PPSIT.
Once the program successfully checks in, run visit update. You may have to run visit update over a narrow window. Be sure to select a window in which the observation schedules. You can use the visit planner in APT to find windows.
Load the program into Spike.