Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.stsci.edu/instrument-news/handbooks/ghrs/GHRS_46.html
Дата изменения: Wed Feb 14 17:44:55 1996
Дата индексирования: Sat Dec 22 16:59:00 2007
Кодировка:
Поисковые слова: arp 220
Standard Patterns for Substepping and Background Measurement

Reference Information on Instrument Performance

Standard Patterns for Substepping and Background Measurement

This table shows how each STEP-PATT pattern measures the background for a science exposure. Listed are the STEP-PATT number, the number of spectrum bins for which substepping occurs, the number of background bins measured, the diodes used to measure the background, the fraction of the total time spent measuring flux on the science diodes, the gratings for which the STEP-PATT is appropriate, and the shortest exposure that can be used for that pattern. The shortest exposure has been computed assuming COMB=4, FP-SPLIT=NO, and STEP-TIME=0.2. These minimum exposures can be reduced by half if COMB=2 is used and by a factor of four for COMB=NO. The complete expression for the minimum exposure time is:

where Nbackground is the number of background bins (col. 3), Nspectrum is the number of spectrum bins (col. 2), and ratio is from column 4. The minimum STEP-TIME is 0.2 sec.

You should specify your exposure time as an integral multiple of tmin.

Table 8.3: STEP-PATT Specifications

Table 8.4:

Default STEP-PATT for science modes

Table 8.3: - STEP-PATT Specifications
Table 8.4: - Default STEP-PATT for science modes