Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.stsci.edu/hst/acs/faqs/etc_7.html
Дата изменения: Unknown
Дата индексирования: Sun Apr 10 17:16:19 2016
Кодировка:
How can I maximize SNR when observing a faint diffuse target in the UV with the SBC?
STScI Logo

Hubble Space Telescope
How can I maximize SNR when observing a faint diffuse target in the UV with the SBC?

     ###Exposure Time Calculator###

     * Are there any special things I should consider if I'm worried about
     getting enough signal-to-noise when observing a faint diffuse target
     in the ultra-violet with the SBC ? 
     Remember, the SBC is a flight spare for the STIS MAMA; and similar
     considerations may apply. The MAMA pixel size is very small projected
     on the sky (0.03 arcseconds per pixel).
     Therefore, the counts per pixel per second may be very low for a
     diffuse source. However, the MAMA has no read noise and
     the per pixel detector plus sky background in the ultraviolet is very
     small. Thus you may be able to gain substantially on the
     signal-to-noise ratio you achieve in a given integration time if do
     not need the very high spatial resolution provided by the SBC,
     simply by planning to integrate the data over multiple spatial
     pixels on the ground. Also, be sure to use the broadest filter
     that excludes the bright geocoronal Lyalpha line and the
     OI airglow at 1300 Angstrom (F140LP).
     The approx 10x fainter OI airglow at 1300 Angstrom may dominate
     the background noise even for F125LP.