Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.stsci.edu/ftp/documents/p2pi/HTMLjavahelpCy20/ch05_logsheet18.html
Дата изменения: Thu May 31 18:26:04 2012
Дата индексирования: Mon Apr 11 19:40:23 2016
Кодировка:
Поисковые слова: arp 220
Optional Parameters [Optional_Parameters]
Space Telescope Science Institute
Cycle 20 Phase II Proposal Instructions
Table of Contents Previous Next Index


HST Phase II Proposal Instructions for Cycle 20 > Chapter 5: Visits, Exposures and Exposure Groups > 5.17 Optional Parameters [Optional_Parameters]
5.17 Optional Parameters [Optional_Parameters]
The Operating Modes of the instruments frequently have parameters that may be adjusted. The default parameter values that have been defined for the various Instrument Configurations and Operating Modes can be overridden by entries in the Optional Parameters form. See the instrument chapters in this document and the Instrument Handbooks for descriptions of the Optional Parameters.
If no values are changed in the Optional Parameters form, default values will be used.
Text Proposal File
If you use more than one Optional Parameter, they must be separated by commas (e.g., BINAXIS1=1, BINAXIS2=1).
Table of Contents Previous Next Index