Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.sao.ru/precise/Midas_doc/doc/95NOV/vol2/node103.html
Дата изменения: Fri Feb 23 12:57:14 1996
Дата индексирования: Tue Oct 2 17:48:14 2012
Кодировка:
EXAMINE/ROMAFOT



next up previous contents
Next: Registration of the Up: The Automatic Path Previous: FIT/ROMAFOT

EXAMINE/ROMAFOT

EXAMINE/ROMAFOT int_tab [hmin,hmax]

This command uses the quality parameters calculated by FIT/ROMAFOT for each object and allows the user to select a threshold to accept or refuse the fit. At the moment, two parameters are calculated by FIT/ROMAFOT: the reduced and the semi--interquartile interval.

EXAMINE/ROMAFOT works on the intermediate table and starts plotting the distributions of these two fit estimators on the graphics terminal or window. A gaussian fit to these two histograms is then performed in order to define the mode and the sigma of the two distributions. At this stage the user can cut the wings to get parameters not influenced by occasional values.

Once the two distributions have been parametrised, a plot of SD versus SIQ appears. In order to detect the objects beyond n times of the distribution in this plot immediately, the mode is marked on both axes and the scale is in units of sigma. Using the cursor the user can select objects whose exceeds the value given by the vertical cursor position (x--axis) or objects whose SIQ exceeds the quantity corresponding to the horizontal cursor position (y--axis), or both. Commands to perform the operations are described in the help documentation and can be displayed using the command ``H''.

Then, ANALYSE/ROMAFOT allows an automatic examination of objects flagged by
EXAMINE/ROMAFOT using the sequence of commands ``4'', ``S''', ``T'' and ``D''. Again, if completeness is not required, it is possible just to ignore these objects in the final registration.

After execution of the command EXAMINE/ROMAFOT the user is in a position similar to that which he finds at the end of the interactive path. However, checking is now limited to objects flagged by EXAMINE/ROMAFOT. To do so one has to execute ANALYSE/ROMAFOT using the commands ``4'', ``S'' and ``T'' (appropriate sets). Then, repeat ``D'' to examine the next window with one star flagged and, if that is the case, correct it.



next up previous contents
Next: Registration of the Up: The Automatic Path Previous: FIT/ROMAFOT



Rein Warmels
Mon Jan 22 15:08:15 MET 1996