Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~phil/mbeam/anacom231-2.5.pdf Дата изменения: Wed Dec 11 18:40:44 2002 Дата индексирования: Tue Oct 2 06:40:30 2012 Кодировка: Поисковые слова: arp 220

RF/Fiber Optic Transceiver AC231-2.5

Features · 2500 MHz Bandwidth · 1.3 µm Low Noise DFB Laser · High Dynamic Range · Optical Stabilization · Monitoring and Alarm Capability · Singlemode Fiber

Description The AC 231-2.5 is a linear, low noise RF fiber optic transceiver designed for fiber optic wireless antenna remoting or repeater applications and other RF systems. The system is composed of a fully integrated transceiver module. The transmitter utilizes a high performance, linear isolated DFB laser operating at 1.3 µm over 9/125 um singlemode fiber. For optimal stability, the laser incorporates average optical power feedback which monitors and actively adjusts the laser for constant power output over temperature and lifetime. The receiver utilizes a highspeed, low distortion InGaAs PIN diode photodetector. Specifications (Tc = 25OC) Parameter Wavelength, peak Bandwidth Frequency Response, 50 to 2500 MHz Input and Output VSWR Spur Free Dynamic Range (1) RF Link Gain (2) Output Noise Floor Input 3rd Order Intercept Notes: (1) SFDR specified with optical loss budget of 2 dB. (2) Link Gain specified with 1 meter fiber.

The RF interface is via a 50 SMA connector and the optical connector is a low reflection FC/APC connector. The unit requires a single 12 volt DC supply with no external settings necessary. A laser and received optical power monitor and alarm is provided. The AC 231-2.5 transceiver integrates the transmitter and receiver section into one package. Individual TX and RX are available. Other packaging options including internal WDM for bidirectional single fiber transmission are available.

Min 1280 2500

Typ 1310 +/- 2.0

Max 1340

Units nm MHz dB

2.0:1 97 0 -130 25

-dB/Hz dB dBm/Hz dBm
2/3


RF/Fiber Optic Transceiver AC231-2.5
Absolute Maximums Parameter Operating Temperature Storage Temperature Maximum RF Input to Transmitter Maximum Optical Input to Receiver D.C. Supply Voltage Package Schematic
0.35 (8.9) 0.75 0.75 (19) (19) 5.375 (136.5) 0.75 (19) 1.125

-30 to +75OC -40 to +85OC +10 dBm 4 mW 12 volts +\-5%

PINOUT
1. Laser Disable 2. Ground 3. +12 volts (250 mA max) 4. Ground

0.156 DIA (4.0) 4X FC/APC Output

Laser Alarm

DC Optical Power Alarm

FC/APC Input

5. Ground 6. Laser Bias Monitor (0.1 V = 10 mA) 7. Laser Bias Alarm (open collector, 25 mA)
2.5 (63.5)

3.0 (76.2)

c

L

8. Received Power Monitor (1V = 1mW) 9. Received Power Alarm (open collector, 25 mA)

SMA RF Input

SMA RF Output 5.0 (127) 5.75 (146)
12345 6789

0.70 (17.8)

0.75 9 pin D, male (19) Dimensions in inches (mm)

0.75 (19)

DANGER
Invisible Laser Radiation. Avoid Direct Exposure to Beam. Maximum Power 50 mW Wavelength 1300 nm Class IIIb Product

Ordering Information Model Number: AC 231-2.5 Description: Fiber Optic RF Transceiver Please consult the Sales Department for other packaging configurations

Laser Warning: Invisible Laser Radiation emitting from optical connector. Avoid direct exposure to beam. 50 mW max. @ 1300nm. Class IIIb. Product complies with 21 CFR 1040.10 and 1040.11.
The information is considered to be accurate however to provide the best product possible, Anacom Systems Corporation reserves the right to make changes and improvements to the specifications without notice.

Anacom Systems Corporation

www.anacomsystems.com

techinfo@anacomsystem.com

3/99

100 Jersey Avenue, Bldg. A, New Brunswick, NJ 08901 · Tel: 732 846-2680 Fax: 732 846-2626