Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~phil/hardware/dds/PalEquations/DDSPAL03/Ddspal03.opi Дата изменения: Fri Aug 16 22:45:14 1996 Дата индексирования: Wed Feb 6 03:07:58 2013 Кодировка: Поисковые слова: arp 220

" This is a sample physical information (.pi) file that is created
" by default when no .pi file is present. To set up a different
" design default, create a "default.pi" file in the local directory
" where PLDesigner-XL is executed.
"
" The pi file is used for specifying device specific parameters while
" maintaining a device independent design entry. Information on the use
" of the pi file is in chapter 14-16 of the PLDesigner-XL User's Guide.
"
" The following parameters are the default values the optimizer uses during
" node collapsing. For more information on controlling the optimizer see
" chapter 13 of the user manual.

{
MAX_SYMBOLS 20,
MAX_PTERMS 16,
POLARITY_CONTROL TRUE,
MAX_XOR_PTERMS 0,
XOR_POLARITY_CONTROL FALSE
};