Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~phil/hardware/vertex/sharemegsvertex/lcu/pcr/lan/NETWARE/ODI/NET.CFG Дата изменения: Fri Oct 1 16:27:58 1993 Дата индексирования: Thu Jan 15 15:46:58 2009 Кодировка: Поисковые слова: arp 220

; *************************************************************************
; This sample NET.CFG file is meant to supply some rudimentary understanding
; of parameters in NET.CFG and how they affect network operations.
; For a full description and explanation of the parameters, see the
; manual for the ODI shell for DOS, which ships with the NetWare package
; or is available from Novell part # 100-000871-001.
;
; Please pay attention to column spacing for the lines. The section header
; line MUST start in column 0 with subsequent lines in that section being
; indented. Comments are designated by semi-colons (;). The NET.CFG is not
; caps-sensitive.
;
; *************************************************************************
;

LINK DRIVER 3C5X9
;
; The following two parameters are required when using two or more EtherLink
; III adapters in a single machine. This parameter specifies which specific
; EtherLink III adapter the driver is to attach itself to.
; PORT NNN, where NNN is the hex base address of the 3C509 ISA adapter
; SLOT NN, where NN is the slot number containing the 3C529, 3C579, or
; 3C509 configured as an EISA adatper.
;
; PORT 200
; SLOT 3
;
; The next few lines specify the frame type. 3C5X9.COM is a 4.0 DOS ODI
; driver. The default frame type is 802.2. To connect to a 3.11 server
; the frame type needs to be changed to 802.3. The following two lines
; perform that change.
;
FRAME ETHERNET_802.3
PROTOCOL IPX 0 ETHERNET_802.3 (binds IPX protocol to frame)
;
;
; This is the driver default
;
; FRAME ETHERNET_802.2
; PROTOCOL IPX 0 ETHERNET_802.2
;
;
;
; %VER NET.CFG - sample Netware DOS ODI configuration file V3.4b