Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.naic.edu/~phil/hardware/vertex/sharemegsvertex/lcu/pcr/cp581/CP580E.MSG Дата изменения: Tue Mar 6 22:06:21 2001 Дата индексирования: Thu Jan 15 10:44:37 2009 Кодировка: Поисковые слова: южная атлантическая аномалия

// English
// CP580/CP581 - messages (errors & info)

/************************************************************************/
/* Message numbers m of CP/DHB driver (-300 < m < 300) */
/************************************************************************/

41 [ ] [CPDHB] Driver synchronous
40 [ ] [CPDHB] Driver not synchronous
31 [ ] [CPDHB] Job received
30 [ ] [CPDHB] No job received
15 [ ] [CPDHB] FETCH with RW received
14 [ ] [CPDHB] SEND with RW received
13 [ ] [CPDHB] FETCH received
12 [ ] [CPDHB] RECEIVE received
11 [ ] [CPDHB] SEND received
0 [ ][CPDHB] Function finished successfully

-1 [ ] [CPDHB] Unknown function number
-2 [ ] [CPDHB] CPU not synchronized
-3 [ ] [CPDHB] Wrong CPU number
-4 [ ] [CPDHB] TCB busy
-5 [ ] [CPDHB] TCB not logged on
-6 [ ] [CPDHB] Wrong DHB type
-7 [ ] [CPDHB] TCB already logged on
-8 [ ] [CPDHB] TCB unknown
-9 [ ] [CPDHB] Job number too high
-10 [ ] [CPDHB] Job number already in use

-51 [ ] [CPDHB] Aborted - negative acknowledgement
-52 [ ] [CPDHB] Aborted - data area not accessible
-53 [ ] [CPDHB] Buffer too small
-54 [ ] [CPDHB] Aborted by SYNCHRON
-55 [ ] [CPDHB] Aborted by RESET
-56 [ ] [CPDHB] Unexpected response with FETCH
-57 [ ] [CPDHB] Unexpected response with RECEIVE-DIRECT
-58 [ ] [CPDHB] Unexpected response with RECEIVE-ALL
-59 [ ] [CPDHB] Unexpected response with SEND-DIRECT
-60 [ ] [CPDHB] Unexpected response with SEND-ALL
-61 [ ] [CPDHB] Aborted by timeout

-80 [ ] [CPDHB] Aborted - parameter error
-81 [ ] [CPDHB] Parameter invalid (PAFE 1)
-82 [ ] [CPDHB] DB/DX does not exist (PAFE 2)
-83 [ ] [CPDHB] Area too small (PAFE 3)
-84 [ ] [CPDHB] Area does not exist (PAFE 4)
-85 [ ] [CPDHB] Status word error (PAFE 5)

/************************************************************************/
/* Error numbers e of CPRECORD driver (e <= -300) */
/************************************************************************/
-300 [ ] Error opening output file
-301 [ ] Format error in configuration file with parameter
-302 Configuration file does not exist
-303 Error when opening configuration file
-304 [ ] Invalid output drive
-305 [ ] Insufficient drive capacity
-306 CPRECORD file cannot be removed from memory
-307 Unknown option
-309 [ ] S5D file: could not be opened
-310 [ ] S5D file: read error
-311 [ ] S5D file: not a root directory
-312 [ ] S5D file: too many subdirectories (>128)
-313 [ ] S5D file: no DV subdirectories
-314 [ ] S5D file: positioning error
-315 [ ] S5D file: too many data elements (> 128)
-316 [ ] S5D file: the configured DV block is missing
-317 [ ] S5D file: Wrong block ID in DV preheader
-318 [ ] S5D file: Wrong block no. in DV preheader
-319 [ ] S5D file: DV preheader address too large (> 4095)
-320 [ ] S5D file: format error, first format = "empty"
-321 [ ] Output drive full
-322 [ ] Error when writing output file
-323 [ ] Output directory not found
-324 [ ] Configuration file: unknown S5 area
-325 [ ] Insufficient number of available DOS clusters
-326 CPRECORD.INI not found in current directory
-327 Configuration file extension is not ".ini" :
-328 CPRECORD is not installed
-329 No parameter set has been found

-330 CP/DHB driver not loaded

-340 [ ] FMT file: could not be opened
-341 [ ] FMT file: unknown format in line
-342 [ ] FMT file: format error in line
-343 [ ] FMT file: too long in line
-344 [ ] S5D file format is permissible only for S5 area DB or DX
-345 [ ] Error when opening log file
-346 [ ] Parameter set does not exist

-400 [ ] Warning: cycle overflow > 10 %

/************************************************************************/
/* Info numbers i of CPRECORD driver (i >= 300) */
/************************************************************************/
300 [ ] Data recording finished
301 [ ] Data recording started
302 [ ] Data recording restarted
303 [ ] Data recording OFF!
304 [ ] Data recording finished!

305 [ ] Recording active =
306 Timer =
307 [ ] Record =
308 [ ] File =
309 [ ] Permanent cycle =

310 'CPRECORD' installs using "CPRECORD.INI" in current directory
311 'CPRECORD /c' installs using
312 'CPRECORD /u' uninstalls
313 'CPRECORD /?' indicates command syntax
314 CPRECORD removed from memory
315 CPRECORD already installed
316 CPRECORD installed ...
317 'CPRECORD /n' suppresses all messages on the screen
318 'CPRECORD /s' starts suspended data recording
319 'CPRECORD /o' works with old configuration files of version 1

320 [ ] Type to continue in spite of
321 [ ] output disk being full
322 ===================================================

330 CP/DHB driver version =
331 CP/DHB interrupt number =
332 CPFILE file functions - version
333 Copyright (c) Siemens AG 1992
334 [ ] Data recording stopped
335 CPRECORD data recording - version
336 Data recording suspended
337 [ ] Data recording aborted

340 'CPRECORD /a' starts automatically without dialog
341 'CPRECCTL' controls CPRECORD

400 ( 1) Cycle time (sec.) =
401 [ ] ( 2) CPU number =
402 [ ] ( 3) S5 area =
403 [ ] ( 4) DB/DX number =
404 [ ] ( 5) Data offset =
405 [ ] ( 6) Data length =
406 [ ] ( 7) Output directory =
407 [ ] ( 8) File extension =
408 [ ] ( 9) Number of files =
409 [ ] (10) Number of data records =
410 [ ] (11) S5 format =
411 [ ] (12) Field delimiter =
412 [ ] (13) Permanent =
413 [ ] (14) Logging =
414 [ ] (15) Log file =
415 [ ] (16) Timeout (sec.) =

/************************************************************************/
/* Info numbers of CPSHELL */
/************************************************************************/
600 [CPSHELL] CPDHB driver missing
601 CPSHELL ready
602 CPSHELL finished