Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.eso.org/~chummel/oyster/manual/node8.html
Дата изменения: Tue Apr 28 19:12:49 2015
Дата индексирования: Sun Apr 10 20:11:23 2016
Кодировка:
Поисковые слова: arp 220

Compiling $\cal OYST\!ER$

Compilation always includes the procedure code which is then saved in oyster/oyster.cpr. This does not apply to GDL installations, where code is compiled on the fly. Makefiles exists in the main $\cal OYST\!ER$ directory which simplify the installation. Use make -f Makefile.idl to compile the IDL installation, and make -f Makefile.gdl to prepare the GDL installation.

If you need to compile the C/FORTRAN external library due to incompatibility of your OS with the pre-compiled Linux 64-bit version, unpack the src.tar.gz file (to be obtained from the author) in the oyster/source folder. Make sure your OS is either Linux or Darwin, checking with the uname UNIX command. The Makefiles will use uname to determine which of the pre-installed Makefiles in the library directories are used for compilation. The only part of the Makefile which still has to be edited manually before running make is Makefile.$<$uname$>$.in in source/c which needs the path to the local IDL installation, as well as the location of the libgfortran.a library file. Then run the make -f Makefile.src command in the home folder.