Документ взят из кэша поисковой машины. Адрес оригинального документа : http://www.atnf.csiro.au/lists/vlbiobs/att-1010/VLBI_checklist.pdf Дата изменения: Fri Jun 21 04:31:00 2013 Дата индексирования: Fri Feb 28 10:44:58 2014 Кодировка: Поисковые слова: флуоресценция

VLBI Observing Checklist
Session: ________________ Experiment: ____________
Initials DOY Time

Station: ____________________

SETUP Start of run: All disks clean Select correct Receiver Update disk summary table Update data transfer table CAL correctly configured Disk health ­ all green Wiki experiment set-up notes ­ Disk set(s) used ­ DAS profile ­ LOs if appropriate ­ cables (BG1, BG3...) ­ Clock offset ­ Receiver if approp. ­ Pol. (LCP/RCP/Lin.) ­ UT start



(www.atnf.csiro.au/vlbi/wiki/index.php?n=Main.DiskSummary) (www.atnf.csiro.au/vlbi/wiki/index.php?n=DiskSummary.PBstoreTransfer) (vlbi wiki Main > Session > Expt. > Antenna)

DURING EXPERIMENT Update wiki page ­ downtime ­ Comments, events Recording now (blue lights) cDisko ­ space remaining ­ BigBuff errors ­ 1pps errors ­ Statistics On source Clocks Cryo temps OK Check weather & radar Check Tsys DAS levels OK Alarms (esp. remote obs.) Phase if appropriate



















AFTER EXPT. Check disk summary table (more than one set used?) Check data transfer table (all disks listed?) Wiki page complete (include disk labels, downtime ­ wind, power, source set) Disconnect remote sessions (if appropriate) Changing disks? Unmount devices then power off IF END OF RUN Loaded & mounted disks contain data to transfer Ship disks as needed